ZyXEL Communications LTE6100 User Manual
Chapter 8 Network Address Translation (NAT)
LTE6100 User’s Guide
62
8.2.2 The Port Forwarding Edit Screen
This screen lets you create or edit a port forwarding rule. Click Add new rule in the Port
Forwarding screen or the Edit icon next to an existing rule to open the following screen.
Forwarding screen or the Edit icon next to an existing rule to open the following screen.
Figure 32
Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 22
Port Forwarding: Add/Edit
LABEL
DESCRIPTION
Service Name
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
WAN Interface
This is the WAN interface through which the service is forwarded.
Start Port
Enter the original destination port for the packets.
To forward only one port, enter the port number again in the External End Port field.
To forward a series of ports, enter the start port number here and the end port number in
the External End Port field.
the External End Port field.
End Port
Enter the last port of the original destination port range.
To forward only one port, enter the port number in the External Start Port field above
and then enter it again in this field.
and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the External Start Port field above.
port number in the External Start Port field above.
Translation Start
Port
Port
This shows the port number to which you want the LTE Device to translate the incoming
port. For a range of ports, enter the first number of the range to which you want the
incoming ports translated.
port. For a range of ports, enter the first number of the range to which you want the
incoming ports translated.
Translation End
Port
Port
This shows the last port of the translated port range.
Server IP
Address
Address
Enter the inside IP address of the virtual server here.
Protocol
Select the protocol supported by this virtual server. Choices are TCP, UDP, or TCP/UDP.
Apply
Click Apply to save your changes.
Back
Click Back to return to the previous screen without saving.