ZyXEL Communications NWA-1100 User Manual
Chapter 4 Tutorial
ZyXEL NWA-1100 User’s Guide
46
Figure 15 Access Point Mode Wireless Setttings
1 Set the Operation Mode to AP.
2 Enter an SSID name, such as “NWA-1100 A”.
3 Choose the channel you want the ZyXEL Device to use.
4 Select the Wireless Mode.
5 Set the Intra-BSS Traffic to Enable.
6 Go to Wireless > Security to configure the ZyXEL Device to use WPA-PSK security
2 Enter an SSID name, such as “NWA-1100 A”.
3 Choose the channel you want the ZyXEL Device to use.
4 Select the Wireless Mode.
5 Set the Intra-BSS Traffic to Enable.
6 Go to Wireless > Security to configure the ZyXEL Device to use WPA-PSK security
mode.
Figure 16 Access Point Mode Security Setttings
4.2.3 Configuring the ZyXEL Device in Wireless Client Mode
Your ZyXEL Device should have a wired connection before it can be set to wireless client
operating mode. Connect your ZyXEL Device to the FTP server. Open the Web Configurator
ZyXEL Device and go to the Wireless > Wireless Settings screen. Follow these steps to
configure Station B.
operating mode. Connect your ZyXEL Device to the FTP server. Open the Web Configurator
ZyXEL Device and go to the Wireless > Wireless Settings screen. Follow these steps to
configure Station B.
1 Select Wireless Client as Operating Mode. Wait for the screen to refresh.