B&B Electronics FOSTCDRI Leaflet
p/n 7209r004 FOSTCDRI 3409ds-1/2
© 2009 by B&B Electronics. All rights reserved.
International Headquarters:
815-433-5100 Fax 433-5104 www.bb-elec.com
European Headquarters:
+353 91 792444 Fax +353 91 792445 www.bb-europe.com
B&B
ELECTRONICS
PRODUCT INFORMATION
Specifications
Serial Technology
RS-232 TD,
RD,
GND
RS-485 2-Wire
Data A(-), Data B(+), GND
RS-422/485 4-Wire
TDA(-), TDB(+), RDA(-), RDB(+), GND
Serial Connector
5 Position, Removable Terminal Block
Data Rate
9.6 to 115.2 kbps
Isolation
2KV RMS, 1 minute
Surge Protection
600 W Peak Power Dissipation
Clamping time < 1 pico-second
Industrial Bus
MODBUS ASCII/RTU
Bias
Built-in, Switchable, 1.2KΩ
Termination
Built-in, Switchable, 120Ω
Fiber Optic Technology
Type / Wavelength
Multimode / 820 nm
Output Power
-16dBm min, -12dBm typical, -9dBm max
Receive Sensitivity
-24dBm min, -25.4dBm max
Cable
62.5/125 micro-meter
Connector ST
Data Rate
Data Rate
9.6 TO 115.2 kbps
Maximum Distance
2.5 miles (4 km)
Idle State
Transmitter Light ON
Power
Source
External
Power Connector
2 Position, Removable Terminal Block
Input Voltage
10 to 48 VDC (56 VDC max)
Power Consumption
0.5 W (Typical), 1.3W (With Termination)
Terminal Blocks
Wire Size Accepted
28 to 12 AWG
Pitch 5.08
mm
Insulation Resistance ≥ 500 MΩ @ 500 VDC
Maximum Torque
Maximum Torque
5 Kg / cm
Indicators
Power Red
LED
FO Receive
Red LED
FO Transmit
Red LED
Mechanical
Dimensions
4.9 x 4.5 x 1.3 in (12.3 x 11.3 x 3.2 cm)
Enclosure
IP 20 Plastic, 35 mm DIN Mount
Weight
0.44 lbs (199.6 g)
MTBF
138904 hours
MTBF Calc. Method
Parts Count Reliability Prediction
Environmental
Op Temperature
- 40 to 80°C (-40 to 176°F)
Storage Temp
- 40 to 85°C (-40 to 185°F)
Op Humidity
0 to 95% Non-condensing
Regulatory
Approvals FCC,
CE,
UL Class 1 DIV 2 Groups A, B, C, D
UL File Number
E222870 (HAZLOC E245458)
Ordering Information
FOSTCDRI
Serial to Multimode fiber optic converter
Required but not included
Power Supply
MDR-20-24 or PS5R-SC24 (C1 D2)
FOSTCDRI
Industrial Serial to Multimode Fiber Converter
9
Data Rates up to 115.2 kbps
9
10 – 48 VDC Input Power Range
9
Wide Operating Temperature
9
3-Way 2000V Optical Isolation
9
MODBUS ASCII/RTU Compatible
9
EMI / RFI Protection
9
UL Class 1 DIV 2
9
Built-in, Switchable Termination & Bias
The FOSTCDRI is our premium Industrial Serial to Multi-
mode Fiber Optic Converter. Designed for rugged industrial
environments, it is UL approved and certified for use in Class
1 Division 2 environments. In addition to direct point-to-point
connectivity, it is capable of operating in a multi-drop mode.
This allows one serial device to communicate with up to 31
others around a fiber ring. Since it supports mixed standards,
you can replace other converters and isolators and add the
EMI / RFI protection inherent to fiber optic communications.
In RS-232 mode, the converter supports transmit and
receive data. Handshaking signals are not passed through. An
Automatic Send Data Control circuit controls the RS-422/485
driver chip, eliminating the requirement for external software.
Easy to install and configure, it has a 12 position DIP
Switch on the bottom to configure RS-422/485 parameters.
The serial data and power cables connect to removable
terminal blocks. ST connectors are used for the fiber.
Remember, when it comes to reliable communications in
harsh duty industrial environments, B&B Electronics ILinx™
brand is your number one choice.