Omnitron 8201-9-W Leaflet
iConverter
iConverter
®
■ The high-density iConverter 19-Module Chassis is 2U
high and supports 19-inch or 23-inch rack mounts
■ Triple-redundant hot-swappable AC, 24VDC and
48VDC power for mission-critical networks
■ NEBS Level 3 Certification
■ Ethernet Backplane allows modules to share data to
support a wide variety of network applications
■ Fiber Cable Management Tray available for high-
density CWDM deployments
■ Up to 19 iConverter chassis can be linked and managed
using a single IP address
■ SNMP management via NetOutlook® provides real-
time port and module information, remote parameter
configuration and trap notification
■ Management is available with the addition of a
management module to the chassis
■ Wide (-40 to +60° C) and extended (-40 to +75° C)
temperature range models are available
■ All iConverter modules are hot-swappable when used
with the 19-Module Chassis
■ Lifetime Warranty and free 24/7 Technical Support
iConverter
19-Module Chassis
Managed Redundant-Power Chassis
The 2U (3.5 inch) high iConverter 19-Module Chassis has
triple-redundant power supplies and can be mounted in a
19-inch or 23-inch rack. It is designed for Enterprise Local
Area Network (LAN) and Metropolitan Area Network (MAN)
applications where fault tolerance and a high-density rack
footprint are essential.
The 19-Module Chassis features three hot-swappable,
redundant power supplies. Universal AC, 24VDC and 48VDC
power supplies can be used in any combination. Omnitron’s
exclusive triple-redundant power supplies operate in load-
sharing mode to reduce the burden on each power supply to
extend the lifetime and fault tolerance.
Power is provided to the nineteen iConverter modules
installed in the chassis via the chassis backplane. When used
with an iConverter management module, the management
capabilities include the ability to monitor the voltage, current
and temperature of each power supply. Any out-of-range
violation can trigger an SNMP trap to allow quick corrective
maintenance.
In addition to handling the power and management data for
each iConverter module, the 19-Module Chassis backplane
allows sharing of Ethernet data between the individual modules.
iConverter modules that are installed in adjacent slots and
equipped with Ethernet backplane ports have the ability to
connect to each other via the chassis’ Ethernet backplane and
facilitate a variety of flexible network applications including
unmanaged, out-of-band managed, in-band managed and
multi-port configurations.
The high reliability of the triple-redundant power system
combined with its AC and DC power options and its ability to
hold nineteen converters in a 2U height make the iConverter
19-Module Chassis the ideal choice in the core of an enterprise,
in a Central Office (CO) or for Point of Presence (POP)
applications where reliability and space are critical.
The iConverter 19-Module Chassis supports the entire family
of iConverter fiber media converters. All iConverter modules
are hot swappable and support multiple mounting options.
KEY FEATURES