Cables Direct 3m CAT6a, M - M ART-103R Leaflet
Product codes
ART-103R
CAT6A Patch Cable
Details correct on: 07/09/2012
Notification
Product Code
ART-103R
Short Description
Red, 10GBase-T, 26AWG, 600MHz, S/FTP, 3Mtr
Full Description
Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable
standard for 10 Gigabit Ethernet. The cable standard provides
performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-
TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and
10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with
previous standards such as Cat6, Cat5e and Cat5.
LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and
corrosive gas emitted during a fire.
Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than
Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data
rate of 10Gbits/s (billion bits per second).
S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each
individual pair is screened by foil and features an overall outer sheath.
This shielding protects the cable from EMI (Electro-Magnetic
Interference).
Snagless Connectors: The connectors feature a
standard for 10 Gigabit Ethernet. The cable standard provides
performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-
TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and
10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with
previous standards such as Cat6, Cat5e and Cat5.
LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and
corrosive gas emitted during a fire.
Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than
Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data
rate of 10Gbits/s (billion bits per second).
S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each
individual pair is screened by foil and features an overall outer sheath.
This shielding protects the cable from EMI (Electro-Magnetic
Interference).
Snagless Connectors: The connectors feature a
“bubble” which
protects the locking clip on the RJ45 from damage or being snapped off
during transport or installation.
Flush Moulded Strain Relief: The flush moulded design allows the
patch cables to be installed side by side in high-density network switches.
The strain relief allows the cables to move without damaging the cable or
breaking away from the connector while it is plugged in a device
This product has been tested and found to comply with the applicable
electrical transmission characteristics specified in: ISO/IEC 11801 ED.2
and ANSI/TIA-568-C.2
IEC 60332-1-2, RoHS Compliant and 3P Verified
Available in 0.5, 1, 2, 3, 5 and 10 metre lengths
All lengths are available in grey, yellow, red, blue green and black.
during transport or installation.
Flush Moulded Strain Relief: The flush moulded design allows the
patch cables to be installed side by side in high-density network switches.
The strain relief allows the cables to move without damaging the cable or
breaking away from the connector while it is plugged in a device
This product has been tested and found to comply with the applicable
electrical transmission characteristics specified in: ISO/IEC 11801 ED.2
and ANSI/TIA-568-C.2
IEC 60332-1-2, RoHS Compliant and 3P Verified
Available in 0.5, 1, 2, 3, 5 and 10 metre lengths
All lengths are available in grey, yellow, red, blue green and black.
Extra Information
Specification:
Red CAT6A cable
Injection moulded snagless connectors
Screened / Foil twisted pair
Low Smoke Zero Halogen
4x 26 AWG Copper
600MHz
RJ45 Shielded connector with 50
Injection moulded snagless connectors
Screened / Foil twisted pair
Low Smoke Zero Halogen
4x 26 AWG Copper
600MHz
RJ45 Shielded connector with 50
µ Inch Gold Plate
3Mtr
www.CablesDirect.co.uk