Transition Networks SGPAT1019-100-NA Leaflet
Stand-Alone
Specifications
Complete list of fiber optic connector specifications [pg 240-252]
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3z
IEEE 802.3x full duplex flow control
IEEE 802.3at Power-over-Ethernet (PoE+)
Switches
Switch 1: Cut-Through Mode (default) or Normal Mode
Switch 2: Link Pass Through Enable (default) or Disable
Switch 3: PoE Enable(default) or Disable
Max Packet Size
9216 Bytes in Cut-Through Mode
2048 Bytes in Normal Mode
2048 Bytes in Normal Mode
Status LEDs
PWR (Power): On = Power
LNK/ACT 1: On = Copper Link, Blinking = Activity
LNK/ACT 2: On = Fiber Link, Blinking = Activity
10/100/1000: Green = Copper 1000Mbps Link
Amber = Copper 100Mbps Link
Off = Copper 10Mbps Link
PoE1: On = RJ-45 (1,2), (3,6) pairs detect PD
PoE2: On = RJ-45 (4,5), (7,8) pairs detect PD
Dimensions
Width: 6.22” [158mm]
Depth: 5.23” [133mm]
Height: 1.57” [40mm]
Power Consumption
Input: 100 – 240 VAC, 47 – 63 Hz
Consumption: Max. up to 30W
Environment
Operating Temperature: 0 to 40 C
Humidity: 5% - 90%
Storage Temperature: -20 to 70 C
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
Complies with FCC Part 15 Class A and CE Mark
Warranty Lifetime
SGPAT10xx-100
SGPAT10xx-100
stand-alone media converter
The SGPAT10xx-100 is a 10/100/1000Base-
T to 1000Base-SX/LX Gigabit Ethernet Media
Converter, which allows two different types
of network segments to be connected eas-
ily and affordably while also injecting PoE+
power through the copper RJ-45 port.
PoE allows for the transmission of power
over the same copper cables used to trans-
mit data. PoE+ media converters are Power
Sourcing Equipment (PSE). This AC powered
media converter combines data received over
a fiber optic link with 56VDC power to pro-
vide power and data to Powered Devices (PD)
over unshielded twisted pair cabling while
complying with IEEE802.3at PoE+ and also
backwards compatible with IEEEE802.3af
standard PoE.
The converter includes a PD signature sens-
ing and power monitoring features. Other
features include over-current protection,
under-current detection, and fault protection
input. Link Pass Through and Remote Fault
Detect allows the media converter to moni-
tor both the fiber and the copper ports for the
loss of a receive (RX) signal and propagate the
failure on to the end devices.
T to 1000Base-SX/LX Gigabit Ethernet Media
Converter, which allows two different types
of network segments to be connected eas-
ily and affordably while also injecting PoE+
power through the copper RJ-45 port.
PoE allows for the transmission of power
over the same copper cables used to trans-
mit data. PoE+ media converters are Power
Sourcing Equipment (PSE). This AC powered
media converter combines data received over
a fiber optic link with 56VDC power to pro-
vide power and data to Powered Devices (PD)
over unshielded twisted pair cabling while
complying with IEEE802.3at PoE+ and also
backwards compatible with IEEEE802.3af
standard PoE.
The converter includes a PD signature sens-
ing and power monitoring features. Other
features include over-current protection,
under-current detection, and fault protection
input. Link Pass Through and Remote Fault
Detect allows the media converter to moni-
tor both the fiber and the copper ports for the
loss of a receive (RX) signal and propagate the
failure on to the end devices.
10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX
10/100/1000 Bridging
Power-Over-Ethernet (PoE+) PSE Media Converter
Features
`
`
Internal AC power supply
`
`
Over-current protection
`
`
Under-current detection
`
`
Minimum load sensing
`
`
Fault Protection Input
`
`
Auto Negotiation
`
`
Auto Cross
`
`
Link Pass Through
`
`
Remote Fault Detect
`
`
Wall mount or Tabletop installation
Ordering Information
SGPAT1013-100
10/100/1000Base T (RJ-45)
[100 m/328 ft.]
to 1000Base-SX 850nm MM (SC)
[62.5/125um: 220m / 722 ft.]
[50/125um: 550m / 1804 ft.]
Link Budget: 7.5 dB
Link Budget: 7.5 dB
SGPAT1039-100
10/100/1000Base T (RJ-45)
[100 m/328 ft.]
to 1000Base-SX 850nm MM (LC)
[62.5/125um: 220m / 722 ft.]
[50/125um: 550m / 1804 ft.]
Link Budget: 7.5 dB
Link Budget: 7.5 dB
SGPAT1014-100
10/100/1000Base T (RJ-45)
[100 m/328 ft.]
to 1000Base-LX 1310nm SM (SC)
[10m / 6.2mi] Link Budget: 10.5 dB
SGPAT1019-100
10/100/1000Base T (RJ-45)
[100 m/328 ft.]
to 1000Base-LX 1310nm SM (LC)
[10m / 6.2mi] Link Budget: 10.5 dB
10/100/1000Base-T to 1000Base-SX/LX Gigabit
10/100/1000Base-T Switch
802.11n Gigabit
Wireless Access Point
PTZ Dome
Network Camera
ION Chassis
Power-over-Ethernet
Media Converters
220m-550m on Multimode
10 Km on Single Mode