Revolabs FLX2 VoIP SIP 10-FLX2-101-VOIP-04-11 Leaflet
Product codes
10-FLX2-101-VOIP-04-11
Making a Call
To make a conference call, take at least one of the Microphones out of the Charger Base, and take the Dialer
out of the Charger Base. You can remove all Microphones and the Speaker if you wish, but this is not required.
Use the Dialer to enter the number you want to call, including any leading digits your telephone connection might
require.
The Speaker and any Microphone that is not in the Charger Base will be active during the call.
To finish a conference call, either press the red hang-up button on the Dialer, or return all Microphones to the
Charger Base.
To make a call using the Dialer as a handset, do not remove any Microphone from the Charger Base before
starting to dial the number. At this point, only the Dialer will be used for the call.
To end the call, press the red hang-up button on the Dialer.
To toggle between handset and speaker phone mode, remove a Microphone out of the Charger Tray and use
the button on the Dialer.
To answer a call in speaker phone mode, simply remove one or more Microphones from the Charger Base
when the Speaker rings.
If a microphone is already out of the charger base when an incoming call comes in, press the button on the
microphone to answer the call in speaker phone mode.
You can also use the Dialer to answer the call by pressing the green call button on the handset. If all
microphones are in the charger at this time, the call will be answered using the handset mode. If at least one
microphone is switched on and not in the charger base, this will answer the call in speaker phone mode.
out of the Charger Base. You can remove all Microphones and the Speaker if you wish, but this is not required.
Use the Dialer to enter the number you want to call, including any leading digits your telephone connection might
require.
The Speaker and any Microphone that is not in the Charger Base will be active during the call.
To finish a conference call, either press the red hang-up button on the Dialer, or return all Microphones to the
Charger Base.
To make a call using the Dialer as a handset, do not remove any Microphone from the Charger Base before
starting to dial the number. At this point, only the Dialer will be used for the call.
To end the call, press the red hang-up button on the Dialer.
To toggle between handset and speaker phone mode, remove a Microphone out of the Charger Tray and use
the button on the Dialer.
To answer a call in speaker phone mode, simply remove one or more Microphones from the Charger Base
when the Speaker rings.
If a microphone is already out of the charger base when an incoming call comes in, press the button on the
microphone to answer the call in speaker phone mode.
You can also use the Dialer to answer the call by pressing the green call button on the handset. If all
microphones are in the charger at this time, the call will be answered using the handset mode. If at least one
microphone is switched on and not in the charger base, this will answer the call in speaker phone mode.
Safety Warnings
• Do not expose any of the FLX2 components to water, moisture, or high humidity.
• Do not expose any of the FL2X components to extreme high or low temperatures.
• Do not expose any of the FLX2 components to lit candles, cigarettes, cigars, or to open flames, etc.
• Do not drop, throw, or try to bend any of the components, as rough treatment could damage them.
• Do not open the casings of any of the components of the FLX2 Conference Phone.
• Do not use any other accessories than Revolabs’ originals intended for use with this product. Use of non-
• Do not expose any of the FL2X components to extreme high or low temperatures.
• Do not expose any of the FLX2 components to lit candles, cigarettes, cigars, or to open flames, etc.
• Do not drop, throw, or try to bend any of the components, as rough treatment could damage them.
• Do not open the casings of any of the components of the FLX2 Conference Phone.
• Do not use any other accessories than Revolabs’ originals intended for use with this product. Use of non-
original accessories may result in loss of performance, damage to the product, fire, electric shock or injury.
The warranty does not cover product failures which have been caused by use of non-original accessories.
The warranty does not cover product failures which have been caused by use of non-original accessories.
• Only use the power adapters provided to connect the components to the power outlet.
• Please note the two different power supplies delivered with the Conference Phone. Ensure that you connect
• Please note the two different power supplies delivered with the Conference Phone. Ensure that you connect
the correct power supply with the FLX2 Base Station and the FLX2 Charging Tray, respectively.
• Do not open or try to modify any of the batteries delivered with the FLX2 Conference Phone components.
Replace batteries only with Revolabs approved batteries.
• Extreme heat, short circuits, or any attempt to open or modify the batteries might cause them to ignite or
explode.
Please download the full FLX documentation at http://www.revolabs.com/Documents/flx/FLX_asg.pdf.
.
Release 1.2.27, March 2012
Revolabs HQ
Revolabs EMEA
144 North Rd
+44 7970518430
Sudbury MA 01776
Revolabs APAC
USA
+85 29229 7743
800.326.1088
Revolabs India
+91.124.4711630