Transition Networks C4TEF1029-122 Leaflet
Point System™
4
Low cost transport capability: (4) T1/E1/J1
4
Target applications of the device include:
FTTx, such as Fiber-to-the-Business,
Fiber-to-the-Building, Fiber-to-the-MDU and
Fiber-to-the-Home; Cell Tower backhaul
Fiber-to-the-Building, Fiber-to-the-MDU and
Fiber-to-the-Home; Cell Tower backhaul
Specifications
Standards
Ethernet interface:
IEEE 802.3™-2008
TDM interfaces:
ANSI T1.102, T1.403 and T1.408
ITU I.431, G.703,G.736, G.775 and G.823
ETSI 300-166, 300-233 and TBR 12/13
AT&T Pub 62411
Switches
Numerous switch settings for line coding, line buildout,
loopback (per port), AIS setting
Jumper
Hardware: device mode is determined by DIP switch settings
Software: device mode is controlled by the most recently saved,
on-board microprocessor settings
Dimensions
Width: 1.72” [44 mm]
Depth: 5.0” [127 mm]
Height: 3.4” [86 mm]
Power Consumption
3.6 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
EN55022 Class A, EN55024, CE mark
Warranty Lifetime
*Note: C4TEF cards cannot be used with the 1-Slot Point System™ Chassis.
*
SFP port uses standard 100BASE-x/oc-3 SFP
C4TEF10xx-120
C4TEF10xx-120
point system™ slide-in-module network interface device
4x T1/E1/J1 Copper to Fiber Transport Mux
T1/E1
see also:
4xT1 Transport Mux Stand-Alone NIDs
The product provides physical layer status monitoring and
alarm classification functions for Telecom operators to man-
age their fiber optic network and reduce OPEX and mainte-
nance costs.
Copper connections are compatible with G.703 and AMI/B8ZS/
Copper connections are compatible with G.703 and AMI/B8ZS/
HDB3; while the optical connection will run at 155 Mbps. A
hardware-based solution guarantees the constant bit rate of
TDM transport without requiring traffic management.
Devices must be used in pairs. Typical installation will include
Devices must be used in pairs. Typical installation will include
a chassis card installed in the Point System™ locally and a
stand-alone device [S4TEF] installed at the remote location.
Application
Features
4
Loopbacks via Test Set
4
Automatic Link Restoration
4
Remote Management
4
Local & Remote Loopback
4
AIS/TAOS
4
LEDs for each data port
4
Settings for line code, line length
local loopback or remote Loopback
4
T1/E1/J1 mode settings
4
Local (AUX) Management Interface
4
Access to complete status
information on local and remote
device
4
Field Upgradeable Firmware
Management Features
4
Report local device status:
• Port Status
• Device settings & configuration
4
Local command operations include:
• Loopback Fiber & T1/E1 per channel
• AIS TX on fiber on loss of copper
link & AIS TX on copper on loss of
fiber link
4
Remote device status:
• Port Status
• Device settings & configuration
4
Remote Commands:
• Loopback Fiber & T1/E1 per
channel
• AIS TX on fiber on loss of copper link
& AIS TX on copper on loss of fiber lin
k
4x T1/E1/J1 Copper to Fiber Transport Mux
Ordering Information
C4TEF1011-120
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1013-120
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1014-120
1310nm single mode (SC)
[20 km/12.4 mi.]
Link Budget: 16.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1015-120
1310nm single mode (SC)
[40 km/24.9 mi.]
Link Budget: 26.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1016-120
1310nm single mode (SC)
[60 km/37.3 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1017-120
1550nm single mode (SC)
[80 km/49.7 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1035-120
1550nm single mode (SC)
[120 km/74.6 mi.]
Link Budget: 36.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*C4TEF1040-120
1 SFP port (Empty)
to
(4) RJ-48
[1.5 km/0.9 mi.]
*C4TEF1040-140
2 SFP ports (Empty)
to
(4) RJ-48
[1.5 km/0.9 mi.]
Single Fiber Products
Recommended use in pairs
C4TEF1029-120
1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1029-121
1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1029-122
1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
C4TEF1029-123
1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
4x T1/E1/J1 Copper to Fiber Transport Mux