Transition Networks S4TEF1035-125 Leaflet

Specifications

Standards 

  Ethernet 

interface: 

   IEEE 

802.3™-2008 

 

   TDM 

interfaces: 

 

 

 

ANSI T1.102, T1.403 and T1.408 

 

 

 

ITU I.431, G.703,G.736, G.775 and G.823 

 

 

 

ETSI 300-166, 300-233 and TBR 12/13 

   AT&T 

Pub 

62411

Switches 

 

Numerous switch settings for line coding, line buildout,  

 

loopback (per port), AIS setting 

Ethernet port settings 

 

Auto-Negotiation, Force speed/duplex and enable  

 

 

Transparent Link Pass Through

Dimensions  

Width: 3.7” [94 mm] 

 

Depth: 4.7” [119 mm] 

 

Height: 1.8” [46 mm]

Power 

 

External AC/DC provided; 12 VDC, 1.25A; unregulated;   

 

standard; UL listed

Power Consumption 

 

4.4 Watts

Operating Temperature 

 

-40°C – 70°C (not including power supply)

Storage Temperature 

 

-40°C – 85°C

Altitude 

 

0 – 10,000 ft.

Operating Humidity 

 

5% – 95% (non-condensing)

Shipping Weight 

 

2 lbs. [0.90 kg]

Regulatory Compliance 

 

EN55022 Class A, EN55024, CE mark

Warranty 

 Lifetime

These products offer a low cost transport capability for four T1/E1/J1 and one Ethernet 
port. The offering will provide copper connections compatible with G.703, AMI/B8ZS/
HDB3 and 10/100BASE-TX; while the optical connection will run at 155 Mbps. TDM 
traffic is not mapped to Ethernet. A hardware-based solution guarantees the constant 
bit rate of TDM transport without requiring traffic management. The product provides 
physical layer status monitoring, alarm classification and data classification functions 
for Telecom providers to manage their fiber optic network and reduce operation and 
maintenance costs. Target applications of the device include: FTTx, such as Fiber-to-
the-Business, Fiber-to-the-Building, Fiber to-the-MDU and Fiber-to-the-Home.

Features

4

Loopback via Test Set

4

Auto-Negotiation for 10/100BASE-TX  

   

4

AutoCross™ (auto MDI/MDI-X)  

    [

4

Transparent Link Pass Through for  

    Ethernet 

4

Automatic Link Restoration 

4

Pause (Flow Control) 

4

Remote Management 

4

Local and Remote Loopback 

4

Remote Fiber Loss Signaling

4

AIS/TAOS

4

LEDs for each data port

4

Settings for line code, line length,  

    local loopback or remote loopback 

    

4

T1/E1/J1 mode settings

4

Local (AUX) Management Interface

 

4

Access to complete status information  

    on local and remote device

4

Field Upgradeable Firmware 

4

Ex-

tended Operating Temperature 

Optional Accessories (sold separately)

    Stand-Alone Power Supply 

    DIN Rail Bracket 5.0” [127 mm]

    DIN Rail Bracket (flat) 3.3” [84 mm]

    Wall Mount Bracket 4.0” [102 mm]

    Vertical Wall Mount Bracket 5.0” [127 mm]

see also: 

4x T1 Transport Mux Point System™ Slide-In-Module NID 

Devices must be used in pairs. Typically installation will include a chassis card  [C4TEF, ] installed 
in the Point System™  locally and a stand-alone device installed at the remote location.

4

Low cost transport capability: 

     (4) T1/E1/J1; (1) Ethernet 

4

Target applications include: FTTx,  

     such  as  Fiber-to-the-Business,  
     Fiber-to-the-Building, Fiber-to-the- 
     MDU and Fiber-to-the-Home.

Application

Ordering Information

 

1300nm multimode (ST) 

to 

(4) RJ-48 

 

plus10/100BASE-TX (RJ-45) 

 

1300nm multimode (SC) 

to 

(4) RJ-48 

 

plus10/100BASE-TX (RJ-45) 

 

1310nm single mode (SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1310nm single mode (SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1310nm single mode (SC)

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1550nm single mode (SC)

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1550nm single mode (SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1 SFP port (Empty) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

2 SFP ports (Empty) 

to 

(4) RJ-48 

plus 10/100BASE-TX (RJ-45) 

 

1310nm TX/1550nm RX single fiber SM 

(SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1550nm TX/1310nm RX single fiber SM 

(SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1310nm TX/1550nm RX single fiber SM 

(SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45) 

 

1550nm TX/1310nm RX single fiber SM 

(SC) 

to 

(4) RJ-48 

 

plus 10/100BASE-TX (RJ-45)