Spaun HNV 30/30 UPE 811267 User Manual
Product codes
811267
147
www.spaun.com
contact@spaun.com
Measur
ement
Measur
ement
Tech-Hint
Functions Of DiSEqC-Monitor TP 216
18.07 V
0.159 A
The receiver sends the DiSEqC
command Option A, Position A and
Horizontal High-Band.
command Option A, Position A and
Horizontal High-Band.
Address 10 contains the command
for all switching components like
multiswitches, corresponding relays
or LNBs for the execution of the
receiver commands.
for all switching components like
multiswitches, corresponding relays
or LNBs for the execution of the
receiver commands.
18.07 V
0.159 A
A transmission error in the DiSeqC-
Protocol will be displayed by the
LED „Parity-Error“.
Protocol will be displayed by the
LED „Parity-Error“.
12.09 V
0.022 A
The receiver sends the DiSEqC
command Option B, Position B and
Vertical High-Band.
command Option B, Position B and
Vertical High-Band.
Address 14 solely responds to a
multiswitch.
multiswitch.
13.71 V
0.039 A
The receiver sends the DiSEqC
command Option A, Position B and
Vertical Low-Band.
command Option A, Position B and
Vertical Low-Band.
Address 10 contains the command
for all switching components like
multiswitches, corresponding relays
or LNBs for the execution of the
receiver commands.
for all switching components like
multiswitches, corresponding relays
or LNBs for the execution of the
receiver commands.
You have the possibility to check the voltage and the current consumption
(indirect current metering) of a LNB, relays or a multiswitch when loaded in
combination with a multimeter.
(indirect current metering) of a LNB, relays or a multiswitch when loaded in
combination with a multimeter.
In addition to that it is possible to meter the level at the test jack, less 20 dB,
at normal operation, by using a suitable antenna measuring set.
at normal operation, by using a suitable antenna measuring set.