Kathrein UFO 333/MX 20610110 Leaflet
Product codes
20610110
UFO
®
compact processing system
Features
DVB-S/HDTV channel unit for
insertion into the UFO
insertion into the UFO
®
compact
(extension) module carriers
UFG 3xx/4xx
UFG 3xx/4xx
To process signals from two DVB-
Sat (or HDTV) transponders into a
COFDM output signal
Sat (or HDTV) transponders into a
COFDM output signal
Enables selection of individual
programmes from two QPSK
modulated DVB-S signals (or 8PSK
modulated DVB-S(2) signals),
multiplexing of both transport
streams and transmodulation of
these into a COFDM-modulated
output channel
programmes from two QPSK
modulated DVB-S signals (or 8PSK
modulated DVB-S(2) signals),
multiplexing of both transport
streams and transmodulation of
these into a COFDM-modulated
output channel
The whole channel unit is integrated
in one module
in one module
Two inputs A/B, settable via the
central controller (e.g. for H/V
switching and to create the cable-NIT
for two polarisations)
central controller (e.g. for H/V
switching and to create the cable-NIT
for two polarisations)
DiSEqC
TM
1.0 to control external
multi-switches
All essential transmission parameters
can be set via the central control unit
can be set via the central control unit
The output level can be set and
switched off via the control unit
switched off via the control unit
Adjacent channel compatible
MPEG transport stream processor:
To set a constant output data rate
(Stuffi ng) with PCR correction
(Stuffi ng) with PCR correction
With programme fi lter to remove
individual TV and radio programmes
(easy setting using the USW 30 and
UFX 31x)
individual TV and radio programmes
(easy setting using the USW 30 and
UFX 31x)
For NIT conversion (cable NIT;
UFX 31x is additionally required)
UFX 31x is additionally required)
For CAT conversion
(insertion of an operator ID)
(insertion of an operator ID)
Origin of EPG data can be switched
between input A and input B (as of
software version V 04)
between input A and input B (as of
software version V 04)
COFDM modulator for modulation
type 2k, Mapping QPSK, 16 QAM,
64 QAM
type 2k, Mapping QPSK, 16 QAM,
64 QAM
MPEG transport stream processor
and COFDM modulator based on
FPGA design
and COFDM modulator based on
FPGA design
Extendable with UFZ 394 Common
Interface retrofi t set for insertion
of two CA modules (input A; as of
software version V 02)
Interface retrofi t set for insertion
of two CA modules (input A; as of
software version V 02)
Software updates via control unit
interface
interface
Required central controller software
version: at least V 9.xx
(CI functionality as of V 9.xx)
version: at least V 9.xx
(CI functionality as of V 9.xx)
Dimensions (W x H x D) in mm:
265 x 27 x 170
265 x 27 x 170
Ambient temperature range for
operation in:
- module carrier with extraction fans
(UFG 412): -20 to +50 °C
- (extension) module carrier without
extraction fans (UFG 3xx):
-20 to +40 °C +40 °C
operation in:
- module carrier with extraction fans
(UFG 412): -20 to +50 °C
- (extension) module carrier without
extraction fans (UFG 3xx):
-20 to +40 °C +40 °C
Packing unit/weight (pc./kg): 1/1.0
Technical data
Transmodulator/multiplexer DVB-S(2)-COFDM
UFO 333/MX
20610110
Type
Order no.
Order no.
Frequency range
(MHz)
Input level
Input
data rate
COFDM
modes
Modulation Error
Rate MER
Max. output
level
Output level
setting range
Current drain
Input
950-2,150 ¹
)
Output
47-100/
110-862 ²
)
(dBµV)
(MS/s)
(dB)
(dBµV)
(dBµV)
(V/mA)
UFO 333 MX
20610110
20610110
55-85
2-45
(DVB-S)
2-30
(DVB-S2)
QPSK
16 QAM
64 QAM
64 QAM
33.5
(< 400 MHz)
32
(> 400 MHz)
91
81-91
5/1200
12.5/750
31/7
¹
)
Tuning in 1 MHz increments
²
)
Tuning in an 8 MHz raster, fi ne tuning in 250 kHz increments
³
)
Adjustable (Stuffi ng
Ch
Ch
Ch