Cisco 10G MR, SFP+ 1548.51, 100 GHz, LC ONS-SC+-10G-48.5= Data Sheet
Product codes
ONS-SC+-10G-48.5=
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 5 of 12
Table 2.
Client Configurations and Mapping
Client
Format
Rate (Gbps)
Mapping
10.3125
CBR-BMP clause 17.2.4 (ex G sup43 7.1) + GMP ODU2e to OPU3e4
10GE LAN-PHY
10.3125
GFP-F clause 17.4.1 (ex G sup43 7.3) + GMP ODU2 to OPU3e4
OC-192 /STM-64
9.953
CBR-BMP clause 17.2.2 (Sync) + GMP ODU2 to OPU3e4
10G FC
10.518
513b Transc + AMP GFP-F clause 17.8.2 + GMP ODU2e to OPU3e4
8G FC
8.500
CBR-BMP clause 17.9 (OduFlex) + GMP ODU2 to OPU3e4
OTU2
10.709
ODU transparent + GMP ODU2 to OPU3e4
OTU2e
11.096
ODU transparent + GMP ODU2 to OPU3e4
Wavelength Tunability
The Cisco ONS 15454 10-Port 10 Gbps Line Card is software provisionable and tunable across the full C-band, on
96 channels on the 50-GHz grid using tunable SFP+ pluggables. Tunability provides flexibility and reconfigurability
of services transported on reconfigurable optical add-drop multiplexer (ROADM) based networks, but also allows
management of a single element from a deployment and sparing perspective.
Flexible Protection Mechanism Support
The Cisco ONS 15454 10-Port 10 Gbps Line Card supports multiple protection mechanisms commonly used in
optical transport networks. Table 3 outlines the available protection options and the associated service-level
agreements (SLAs) that can be provided.
Table 3.
Protection Formats
Protection Type
Capabilities
Unprotected
No client terminal interface, transponder card, or DWDM line protection.
The client signal is transported over a single unprotected transponder card or optical path.
Y-cable protection
Provides transponder card and DWDM line protection without requiring client terminal interface protection.
Uses Y-protection devices to optically split a single client interface to two transponder cards. The Cisco ONS
15454 system controls the transponder card active or standby status to provide a single signal feed to client
equipment.
15454 system controls the transponder card active or standby status to provide a single signal feed to client
equipment.
OCH-trail protection
Provides protection for the DWDM signal through external optical switch units (Protection Switch Module [PSM]).
Flow-Through Timing
The Cisco ONS 15454 10-Port 10 Gbps Line Card allows the timing to flow through from client to line optical
interface. The received timing from the client interface is used to time the line transmitter interface. This flow-
through timing allows multiple line cards to be placed in the same shelf, each timed independent of the network
element timing.
Management
The Cisco ONS 15454 MSTP provides comprehensive management capabilities to support the Operations,
Administration, Maintenance, and Provisioning (OAM&P) capabilities through the integrated Cisco Transport
Controller craft interface with support from the Cisco Prime™ Optical element management system. The Cisco
ONS 15454 10-Port 10 Gbps Line Card features provisionable digital wrapper (G.709) functionalities, providing
per-wavelength performance management capabilities, especially for services transported transparently across
the network. Without the digital-wrapper functions, a carrier transporting a service transparently would be unable
to identify network impairments that may degrade the transported signal and violate the SLA agreements. The
digital wrapper’s Generic Communication Channel (GCC) provides a separate communications channel on a per-