Sony VPL-CW275 User Manual

Projectors

Users can easily select power-saving 
ECO Modes. The most energy-
efficient mode is accessible though 
a single button-push with further 
adjustments available through an 
easily understood menu system.

The filter only needs to be changed 
when a new lamp is fitted, potentially 
halving disruption due to maintenance.

The projectors can correct keystone 
distortion by V: +/- 30% H: +/- 20% 
for perfect installation adjustment.  
(Note that since this is an electronic 
correction, it will reduce the picture 
quality slightly.)

The image warping feature allows 
an 8 point (4 corners and 4 sides) 
image adjustment for convex or 
concave projected surfaces.  
Making adjustments is easy with  
the remote control and the on-
screen operating menu.

With Digital Zoom, users can enlarge 
a selected area of a computer-
souce image on the screen up  
to four times.

The VPL-CW255 and CW275 have six 
picture modes (Dynamic, Standard, 
Game, Living, Cinema and 
Presentation) that can be selected 
to suit the nature of the source 
material.   

The Sony 0.63 inch BrightEra 
inorganic TFT 3-LCD panels deliver 
improved panel light resistance, 
higher resolution, high brightness  
and increased panel reliability.

When a computer is used as a 
picture source, APA automatically 
optimises Phase, Pitch and Shift 
values. These can also be adjusted 
manually.

Auto Input Search detects which 
input has an incoming signal and 
automatically switches to it. This 
makes it easier for users to set up 
the projectors prior to making a 
presentation.

If the picture needs to be turned off, 
all it takes is a single button-press 
on the remote control. This will mute 
audio at the same time. There is also 
a separate “mute audio” button for 
audio-only muting.

To avoid the need for a separate 
audio switcher, the projectors can 
be used to select between two 
audio sources, routing them via a 
variable audio output to the room 
amplification system.

Picture Freeze is useful during 
presentations where users need to 
look at other material on their PC’s 
screen without the viewing audience 
being aware. Freeze the current 
image and users can use their PC 
independently of the display from 
the projectors.

At the end of a presentation, users 
can turn off the power supply to the 
projectors immediately, instead of 
going through a ‘power down’ cycle. 

With this function, there is no need 
to go through ‘Standby’ mode when 
powering up the projectors. The 
projectors can be set to activate as 
soon as power is supplied.

Both projectors have a package 
of security measures, including 
password protection and physical 
anti-theft anchor points.