Panasonic PT-TW231RU User Manual
High Brightness of 2,500 lm and a 10 W High-output
Speaker Meet Your Meeting/Seminar Room Needs.
Speaker Meet Your Meeting/Seminar Room Needs.
High brightness of 2,500 lm ensures bright and easy-to-see image projection.
The volume level of the 10 W high-output speaker is enough for meeting
rooms and classrooms; you do not need to use an external speaker. You can
make multi-media presentations (including audio presentations).
The volume level of the 10 W high-output speaker is enough for meeting
rooms and classrooms; you do not need to use an external speaker. You can
make multi-media presentations (including audio presentations).
0.42 W Standby Power Consumption*
5
When Standby mode is set to Eco, the standby power consumptions is as low
as 0.42 W *
as 0.42 W *
5
, reducing running cost and effects on the environment.
Lamp and Air Filter Replacement Cycle of Up to 4,000 Hours
The lamp replacement cycle of up
to 4,000 hours*
to 4,000 hours*
2
. The air fi lter is
constructed of three layers with
different mesh sizes. The air fi lter
replacement cycle is also 4,000
hours*
different mesh sizes. The air fi lter
replacement cycle is also 4,000
hours*
3
. Such replacement cycles
reduce maintenance hassles,
because longer periods of use
translate to lower maintenance
costs and environmental impact.
because longer periods of use
translate to lower maintenance
costs and environmental impact.
Quiet 29-dB*
4
Design Does Not Interrupt
Meetings or Classes
As the quiet design keeps noise levels down to 29-dB*
4
, the sound of the
cooling fan is hardly noticeable. The audience can concentrate on the
presentation and the screen images even during quiet scenes.
presentation and the screen images even during quiet scenes.
Extensive Interfaces with an HDMI Input Terminal
Extensive interfaces, including two sets of computer (RGB) input terminals
(one set is switchable to output.) and an HDMI input terminal, allows a wide
range of system confi gurations.
(one set is switchable to output.) and an HDMI input terminal, allows a wide
range of system confi gurations.
Easy to Replace the Lamp and Air Filters
You can replace the lamp from the top
and the air fi lters from the back of the
projector. There is no need to detach
the projector from the ceiling bracket.
and the air fi lters from the back of the
projector. There is no need to detach
the projector from the ceiling bracket.
Wireless Remote Control is Convenient
When Using More Than One Projector.
When Using More Than One Projector.
A maximum of six IDs can be set up, allowing individual remote
control of several projectors.
control of several projectors.
Easy Remote Monitoring and Control
Web browsers of computers connected via wired LAN allow you to remotely
operate the projector and check its status. The email messaging function lets
you know when to replace the lamp, and notifi es you of the projector status.
Multi Projector Monitoring and Control Software is available to monitor and
control multiple Panasonic projectors using a single computer. The wired LAN
terminal is compatible with PJLink
operate the projector and check its status. The email messaging function lets
you know when to replace the lamp, and notifi es you of the projector status.
Multi Projector Monitoring and Control Software is available to monitor and
control multiple Panasonic projectors using a single computer. The wired LAN
terminal is compatible with PJLink
TM
(class 1). The open protocol that is used
by many manufacturer ensures control of system confi gurations which include
projectors of other manufacturers.
projectors of other manufacturers.
Basic concept of the Multi
Projector Monitoring and
Control Software
Projector Monitoring and
Control Software
Remote Control via
Web Browser
Web Browser
Startup Logo Function*
6
is Effective for
Theft Prevention
To start projection, you can display your pre-registered logo. Displaying your
school or company logo aids in theft prevention. The password function
prevents unauthorized use of the projector.
school or company logo aids in theft prevention. The password function
prevents unauthorized use of the projector.
“Direct Power Off” Right after Use
The breaker in the room is directly turned off without operating the power
switch of the ceiling-mounted projector. You can leave the room immediately
after the meeting or the class.
switch of the ceiling-mounted projector. You can leave the room immediately
after the meeting or the class.
No halogenated fl ame retardants are used in the cabinet.
•
Lead-free glass is used for the lens.
•
Low standby power of 0.42 W*
•
5
Switchable lamp mode
•
Eco-friendly
*1 Only PT-TW231R has this function.
*2 This is the maximum value when the lamp power is set to Eco mode where the lamp is
*2 This is the maximum value when the lamp power is set to Eco mode where the lamp is
turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on
for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement
cycle is 3,000 hours.The usage environment affects the duration of the lamp.
for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement
cycle is 3,000 hours.The usage environment affects the duration of the lamp.
*3 With the lamp power set to Eco. The usage environment affects the duration of the fi lter.
*4 When the lamp power is set to Eco and fan control is set to Off.(Non-high altitude setting)
*5 Standby mode: Eco. When the Standby mode is set to Eco, network functions such as
*4 When the lamp power is set to Eco and fan control is set to Off.(Non-high altitude setting)
*5 Standby mode: Eco. When the Standby mode is set to Eco, network functions such as
LAN Standby On do not work.
*6 To register a logo, the included Logo Transfer Software is required.
Large
Medium
Small
Urethane
Urethane
Hole punched (metal)
Dust
3-Layer Air Filter
PT-TW231R/TW230
Auditorium
Lecture room
Seminar room
Classroom
kaigai_T_0305_2.indd 3
12.3.14 10:15:47 AM