HP 684332-071 User Manual
Display assembly
NOTE:
The display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a.
Service cover (see
)
b.
c.
Optical drive (see
d.
WLAN module (see
e.
WWAN module (see
)
f.
Fan (see
)
g.
Keyboard (see
h.
Base enclosure (see
)
i.
Function board (see
)
j.
System board (see
Remove the display assembly:
1.
Position the computer with the front toward you.
2.
Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
3.
Swing the display hinges (2) up and back until the top cover is free for removal.
Component replacement procedures
107