HP 684332-071 User Manual

The hard drive spare part kit does not include the hard drive bracket or screws.

750-GB, 7200-rpm, 9.5-mm

633252-001

500-GB, 7200-rpm, 9.5-mm SED

683801-001

500-GB, 7200-rpm, 9.5-mm

634925-001

320-GB, 7200-rpm, 9.5-mm

634862-001

Hard Drive Hardware Kit (includes hard drive bracket and screws)

642774-001

Before removing the hard drive, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see 

Remove the service cover (see 

Remove the hard drive:

Loosen the three Phillips screws (1) that secure the hard drive to the computer.

Use the hard drive tab (2) to slide the hard drive to the right to disconnect it from the system
board.

62

Chapter 4   Removal and replacement procedures