HP 684332-071 User Manual
3.
Remove the speaker assembly (2) from the base enclosure.
Reverse this procedure to install the speaker assembly.
RJ-11 jack cable
NOTE:
The RJ-11 jack cable is included in the Cable Kit, spare part number 641830-001.
Before removing the RJ-11 jack cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a.
Service cover (see
)
b.
Optical drive (see
)
c.
d.
)
e.
Keyboard (see
f.
Base enclosure (see
)
Component replacement procedures
85