Panduit WMPV45E Leaflet
Bend radius fingers
Align with rack spaces to support cables as they transition to the vertical
pathway; pass through holes maintain cable bend radius ensuring
network performance and reliability
pathway; pass through holes maintain cable bend radius ensuring
network performance and reliability
Large finger opening
Each accommodates up to 24 Category 6 cables eliminating the need to
remove fingers for cable routing speeding installation and maintenance
remove fingers for cable routing speeding installation and maintenance
Dual hinged cover
Can be opened 110 degrees to the left or right to provide complete
access to the cables inside the vertical pathway
access to the cables inside the vertical pathway
Integral cable retainers
On the end of each finger to help contain cables within each rack
unit to simplify installation and maintenance
unit to simplify installation and maintenance
Snap-on cable retainers
Can be placed on to fingers to help retain cables in channel during
system installation and maintenance
system installation and maintenance
Dimensions:
WMPV22E: 41.5''H x 4.9''W x 12.0''D (1054mm x 125mm x 306mm)
WMPVF22E: 41.5''H x 4.9''W x 6.5''D (1054mm x 125mm x 165mm)
WMPV45E: 83.0''H x 4.9''W x 12.0''D (2108mm x 125mm x 306mm)
WMPVF45E: 83.0''H x 4.9''W x 6.5''D (2108mm x 125mm x 165mm)
WMPVHC45E: 83.0''H x 6.7''W x 14.1"D (2108mm x 170mm x 357mm)
WMPVHCF45E: 83.0''H x 6.7''W x 7.6''D (2108mm x 170mm x 192mm)
WMPVF22E: 41.5''H x 4.9''W x 6.5''D (1054mm x 125mm x 165mm)
WMPV45E: 83.0''H x 4.9''W x 12.0''D (2108mm x 125mm x 306mm)
WMPVF45E: 83.0''H x 4.9''W x 6.5''D (2108mm x 125mm x 165mm)
WMPVHC45E: 83.0''H x 6.7''W x 14.1"D (2108mm x 170mm x 357mm)
WMPVHCF45E: 83.0''H x 6.7''W x 7.6''D (2108mm x 170mm x 192mm)
Packaging:
Managers include hinged covers, wire retainers, mounting brackets,
#12 – 24 and M6 screws and an instruction sheet
#12 – 24 and M6 screws and an instruction sheet
Mounting options: When attached to the side of a standard 19" EIA rack, the pitch of a
WMPV vertical manager is 25.3" and the pitch of a WMPVHC vertical
manager is 27.1"
manager is 27.1"
Managers can be center mounted between two adjacent EIA 19" or 23"
racks by using the WMPVCBE bracket kit
racks by using the WMPVCBE bracket kit
Managers can be mounted to Panduit CMR19X84S and 7 foot R4P series
of 4 post racks by using the WMPVSMK hardware kit; two kits are needed
for center mounting
of 4 post racks by using the WMPVSMK hardware kit; two kits are needed
for center mounting
Managers can be side or center mounted to the front or rear of a rack with
dimensions of up to 1 5/8" (41.1mm) from the outside edge of a rack to
the center of the mounting hole by using the WMPVCMB bracket kit; two
kits are needed for center mounting; when attached to the side of a 19"
rack using a WMPVCMB bracket kit, the pitch of a WMPV vertical
manager is 25.8" and the pitch of WMPVHC vertical manager is 27.6"
dimensions of up to 1 5/8" (41.1mm) from the outside edge of a rack to
the center of the mounting hole by using the WMPVCMB bracket kit; two
kits are needed for center mounting; when attached to the side of a 19"
rack using a WMPVCMB bracket kit, the pitch of a WMPV vertical
manager is 25.8" and the pitch of WMPVHC vertical manager is 27.6"
w w w. p a n d u i t . c o m
k e y f e a t u r e s a n d b e n e f i t s
a p p l i c a t i o n s
t e c h n i c a l i n f o r m a t i o n
s p e c i f i c a t i o n s
The vertical cable manager shall be capable of
mounting to EIA racks to manage cables on the
front and rear of the rack. The manager shall be
molded out of plastic and possess cable management
fingers and pass through holes. The fingers shall
provide integral bend radius control and be spaced
so that the gaps between the fingers align with EIA
rack spaces. The pass through holes shall provide
bend radius control and slots that can be used for
securing of cable straps. The vertical manager shall
have a dual hinged cover that can be opened to the
left or right 110 degrees. The manager shall be able
to accept wire retainers that can be snapped on
to the cable management fingers.
mounting to EIA racks to manage cables on the
front and rear of the rack. The manager shall be
molded out of plastic and possess cable management
fingers and pass through holes. The fingers shall
provide integral bend radius control and be spaced
so that the gaps between the fingers align with EIA
rack spaces. The pass through holes shall provide
bend radius control and slots that can be used for
securing of cable straps. The vertical manager shall
have a dual hinged cover that can be opened to the
left or right 110 degrees. The manager shall be able
to accept wire retainers that can be snapped on
to the cable management fingers.
Panduit
®
NetRunner
™
Vertical Cable Managers
provide a cost-effective solution that organize,
manage, and protect network cabling in
telecommunication rooms and data centers.
Cable management fingers simplify cable routing
during installation and maintenance. Bend radius
control helps protect cables from kinks, snags,
and crushing, ensuring system performance and
manage, and protect network cabling in
telecommunication rooms and data centers.
Cable management fingers simplify cable routing
during installation and maintenance. Bend radius
control helps protect cables from kinks, snags,
and crushing, ensuring system performance and
reliability. Multiple sizes and mounting options
allow for use in a variety of applications. When
used with Panduit
allow for use in a variety of applications. When
used with Panduit
®
Mini-Com
®
Patch Panels,
patch cords, horizontal cable managers and
racks, the user receives a complete end-to-end
solution that satisfies functional requirements
and showcases network cabling.
racks, the user receives a complete end-to-end
solution that satisfies functional requirements
and showcases network cabling.
NetRunner
™
Vertical Cable Managers
Front and rear
22 RU, 4" x 5":
22 RU, 4" x 5":
WMPV22E
45 RU, 4" x 5":
WMPV45E
45 RU, 6" x 6":
WMPVHC45E
Front only
22 RU, 4" x 5":
22 RU, 4" x 5":
WMPVF22E
45 RU, 4" x 5":
WMPVF45E
45 RU, 6" x 6":
WMPVHCF45E
Replacement Covers
4" wide:
WMPVHRCE
6" wide:
WMPVHCRCE
4 Post Racks, 19" Mount – 7 Foot
23" deep:
R4P23*
30" deep:
R4P*
36" deep:
R4P36*
42" deep:
R4P42*
*Add "CN" for Cage Nut Rails
NetManager
™
High Capacity
Horizontal Cable Managers
Front and rear
1 RU:
1 RU:
NM1
2 RU:
NM2
3 RU:
NM3
4 RU:
NM4
Front only
1 RU:
1 RU:
NMF1
2 RU:
NMF2
3 RU:
NMF3
4 RU:
NMF4
Accessories
Center mount bracket kit :
WMPVCBE
(For use with EIA standard racks)
Side mount hardware kit :
WMPVSMK
(For use with Panduit CMR19X84S
and 7 foot R4P series of
4 post racks.)
and 7 foot R4P series of
4 post racks.)
Rack adapter bracket kit:
WMPVCMB
(For use with racks with dimensions
up to 1 5/8" (41.1mm) from outside
edge of the rack to the center of
the mounting hole)
up to 1 5/8" (41.1mm) from outside
edge of the rack to the center of
the mounting hole)
Cable retainers:
WR5E-X
(Package of 10)
Rack top trough
with waterfall:
with waterfall:
WMPV45ERTW
(For use with CMR19X84 and
WMPV45E/WMPHC45E)
WMPV45E/WMPHC45E)
End panel:
WMPV45EP
(For use with WMPV45E)
End panel:
WMPVHC45EP
(For use with WMPVHC45E)
SPECIFICATION SHEET
NetRunner
™
Vertical Cable Managers
Standard 2 Post Racks – 7 Foot
19" mount:
CMR19X84
19" mount:
CMR19X84S
23" mount:
CMR23X84
PatchLink
™
Horizontal Cable Managers
Front and rear, 2 RU:
WMP1E
Front and rear, 1 RU:
WMPSE
Front only, 2 RU:
WMPF1E
Front only, 1 RU:
WMPFSE