Steinner SHM 300 User Manual
USER MANUAL
shm 300
Rechargeable shaver
ENG
Names of parts:
Charging:
1.
Push the switch down and close electrical
power.
power.
The charging indicator is on,which shows
that it is Charging, After 8–16 hours,charging
is over.
that it is Charging, After 8–16 hours,charging
is over.
2. Charging power:AC 230V,50Hz
3.
3.
Be sure the stored power is out completely
before charging, which the battery can
durable.
before charging, which the battery can
durable.
4.
The shaver can be used for about 7 days after
Charging.
Charging.
Accessories:
Usage:
1.
Take off the shelter and push the switch
up. Softly touch your skin and move it in the
contrary growth direction of beards slowly.If
you stretch your skin tightly,you can obtain
better effect. Once the shaving is over,push
the switch down at once and cover it with the
shelter.
up. Softly touch your skin and move it in the
contrary growth direction of beards slowly.If
you stretch your skin tightly,you can obtain
better effect. Once the shaving is over,push
the switch down at once and cover it with the
shelter.
2.
Charging time can’t exceed 20 hours or it
affects The life of battery,even damages the
line.
affects The life of battery,even damages the
line.
Usage(trimmer):
1.
Open the back cover and pull off the trimmer.
2.
Softly touch your skin in the right-angle
direction with the trimmer and trim slowly.
direction with the trimmer and trim slowly.
3.
After using, push down the switch and cover
it with the shelter.
it with the shelter.
Maintenance:
Push down the switch and take off the shelter.
Press the outer-cutter button and take off the
outer cutter. Clean the beards on the outer cutter,
the inner cutter and the body(1 time a week).After
cleaning, assemble the outer cutter and the inner
cutter on the original position and cover it with
the shelter.
Do not change the positions of 1,2 and 3 and the
directions of net cover so as to avoid the affection
to the normal operation of razor.
Press the outer-cutter button and take off the
outer cutter. Clean the beards on the outer cutter,
the inner cutter and the body(1 time a week).After
cleaning, assemble the outer cutter and the inner
cutter on the original position and cover it with
the shelter.
Do not change the positions of 1,2 and 3 and the
directions of net cover so as to avoid the affection
to the normal operation of razor.
Notes:
Don’t press the net shelter.
Don’t force open the net shelter with a screw
driver
driver
Don’t clean the body with water or it occurs
troubles.
troubles.
Don’t charge or store near a warmer, near or in
the moisture or in the direct sunlight, for example
in the car in summer.
the moisture or in the direct sunlight, for example
in the car in summer.
Do take off the batteries and make a safe
treatment when you want to discard this utensil.
treatment when you want to discard this utensil.
Cover
Foil
1
2
3
Cutter
Outer-Cutter Button
Body
Switch
Charging Indicator
Wiring
brush
1
2
3
SHM_300_manual_A4.indd 2
SHM_300_manual_A4.indd 2
21.6.2011 9:26:27
21.6.2011 9:26:27