Fujitsu TX200 S7 + Windows Server 2012 Standard 2CPU & 2VM VFY:T2007SC050IN + S26361-F2567-D420 Data Sheet

Data Sheet

 Fujitsu PRIMERGY TX200 S7 Server 

Page 4 / 10

www.fujitsu.com/fts

Interfaces

Status LEDs

System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
CPU status
Fan status
Hard disk error
Temperature
CSS (yellow)
Memory status
PSU status (green/ amber)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)

Onboard or integrated Controller

RAID controller

additional RAID controller options are described under Components RAID controller

SATA Controller

Intel® C602, 6-port SATA (4x for internal hard disks, 2x for accessible drives)

SATA controller type notes

On board SATA controller supports RAID levels 0, 1, 10

Remote Management Controller

Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x4 (mech. x8)

2 x Full height 280 mm max. length 

PCI-Express 3.0 x16

2 x Full height 280 mm max. length; second x16 slot only with 2 CPUs available 170 mm length

PCI-Express 2.0 x4 (mech. x8)

1 x Full height 230 mm max length; preferred RAID slot

PCI-slots

1 x PCI 32/33 MHz, 1x long, 5V

Slot Notes

in SAS configuration 1x PCI-Express occupied by modular RAID controller

Drive bays

Storage drive bays

3.5-inch or 2.5-inch hot-plug SAS/SATA

Notes accessible drives

All possible options described in relevant system configurator.

Storage drive bays

Max 8 (4 + 4) x 3.5-inch

Max 16 (8 + 8) x 2.5-inch

Accessible drive bays

3 x 5.25/1.6-inch for 4 x 3.5-inch HDD/SSD, or 2 x 3.5-inch 
HDD/SSD + 1 x LTO + 1 x LSD
1 x 5.25/0.5-inch for slimline ODD

3 x 5.25/1.6-inch for 8 x 2.5-inch HDD/SSD + LTO/ODD, or 
8 x 2.5-inch HDD/SSD + slim DVD + LSD

Fan Configuration

Number of fans

4

Fan configuration

3 + 1 redundant

Fan notes

redundant fan configuration depends on base unit and is only available in combination with redundant PSU

Operating panel

Operating buttons

On/off switch
NMI button
Reset button