HP ML310e 674786-421 User Manual
Product codes
674786-421
Expansion Slots
Expansion
Slot #
Technology
Bus Width*
Connector
Width
Form Factor
Notes
4
PCIe 3.0
X8
X16
Full Length/Full
Height
3
PCIe 3.0
X8
X8
Full Length/Full
Height
2
PCIe 2.0
X4
x8
Full Length/Full
Height
1
PCIe 2.0
X1
X4
Half Length/Full
Height
*Indicates the number of physical electrical lanes running to the connector.
NOTE: PCIe Gen3 support with Intel Xeon E3-1200v2 family only.
NOTE: PCIe Gen3 support with Intel Xeon E3-1200v2 family only.
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
QuickSpecs
HP ProLiant ML310e Generation 8 (Gen8)
Standard Features
DA - 14339 Worldwide — Version 19 — June 14, 2013
Page 4