Huawei S3700-52P-PWR-SI 02354132 Quick Setup Guide
Product codes
02354132
Table 4-4 Signal cable checklist
No.
Item
Method
1
All the signal cables to be deployed pass
the continuity check.
the continuity check.
-
2
No signal cable is placed on the heat
dissipation holes of the cabinet.
dissipation holes of the cabinet.
-
3
The bent part of a signal cable cannot be
too tight.
too tight.
4
The cables in the cabinet cannot be
crossed and the cables outside the cabinet
are bound.
crossed and the cables outside the cabinet
are bound.
-
5
The two ends of a signal cable are clearly
identified by labels and the texts on the
labels are in the same direction.
identified by labels and the texts on the
labels are in the same direction.
-
6
The bolts that fix the cables are tightened. -
4.2 Powering on the Device
Turn on the power module of the device.
4.3 Checking After Power-on
Check the following items after the device is powered on:
l
The sound of fan rotating can be heard and that the air exhaust from the air vents can be
felt.
felt.
l
The indicators of the power modules run normally. Normally, the INPUT and OUTPUT
indicators are on.
indicators are on.
l
The indicators of the fan modules run normally. Normally, the STATUS indicator is on.
S2700&S3700 Series Ethernet Switches
Quick Start
Quick Start
4 Powering on the Device
Issue 01 (2012-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
28