Huawei S3700-52P-PWR-SI 02354132 Quick Setup Guide

Product codes

02354132

Figure 5-4 Selecting the terminal type

----End

Follow-up Procedure

After the preceding configurations are complete, press Enter. If the prompt <Quidway> is
displayed on the screen, it indicates that the Command Line Interface (CLI) is displayed. In this
case, you can enter commands to configure or manage the S2700&3700. For details on
configuration procedures, see the following sections.

5.2 Example for Configuring to Manage the SwitchThrough
Telnet

Networking Requirements

As shown in

Figure 5-5

, SwitchA is newly added to the network. SwitchA and SwitchB are

connected through a trunk link. To enable the network administrator to manage SwitchA
remotely, you need to configure the Telnet service and set the device name on SwitchA.

S2700&S3700 Series Ethernet Switches
Quick Start

5 Logging in to the Device

Issue 01 (2012-06-30)

Huawei Proprietary and Confidential