Fujitsu TX150 S8 VFY:T1508SC030IN/M4 Data Sheet

Data Sheet

 Fujitsu PRIMERGY TX150 S8 Mono-Socket Intel® Xeon® processor server  

Page 4 / 10

www.fujitsu.com/fts

Interfaces

Status LEDs

System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
CPU status
Fan status
Hard disk error
Temperature
CSS (yellow)
Memory status
PSU status (green/ amber)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)

Onboard or integrated Controller

RAID controller

additional RAID controller options are described under Components RAID controller

SATA Controller

Intel® C602, 2 ports used for accessible drives 
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux; 

SATA controller type notes

On board SATA controller supports RAID levels 0, 1, 10

Remote Management Controller

Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x4 (mech. x8)

2 x Full height 280 mm length

PCI-Express 3.0 x16

1 x Full height 280 mm length

PCI-Express 2.0 x1 (mech. x16)

1 x Full height 170 mm length

PCI-Express 2.0 x4 (mech. x8)

1 x Full height 230 mm length; preferred RAID slot

PCI-slots

1 x PCI 32/33 MHz, 1x long, 5V

Slot Notes

in SAS configuration 1x PCI-Express occupied by modular RAID controller.

Drive bays

Storage drive bays

3.5-inch or 2.5-inch hot-plug SAS/SATA

Notes accessible drives

all possible options described in relevant system configurator

General system information

Number of fans

3

Fan configuration

3 + 1 redundant

Fan notes

Redundant fan configuration is only available in combination with redundant PSU

Operating panel

Operating buttons

On/off switch
NMI button
Reset button