Tripp Lite OmniSmart 700 OMINISMART700 User Manual
Product codes
OMINISMART700
Input cord length (m)
1.8
BATTERY
Full load runtime (minutes)
4 min. (450w)
Half load runtime (minutes)
17 min. (225w)
DC system voltage (VDC)
12
Battery recharge rate
(included batteries)
(included batteries)
Less than 4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
cartridge (internal UPS
battery replacement)
Battery Access
Battery access door
Battery replacement
description
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Overvoltage correction
Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction
Input voltages between 93 and 107 are boosted by 14%
Severe undervoltage
correction
correction
Input voltages between 75 and 92 are boosted by 30%
LEDS ALARMS & SWITCHES
LED Indicators
4 LEDs indicate line power, battery power, overload and battery low/replace status
Alarms
Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
rating
510
UPS AC suppression
response time
response time
Instantaneous
UPS Dataline suppression
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise
suppression
suppression
Yes
AC suppression joule rating
510
AC suppression response
time
time
Instantaneous
Dataline suppression
1 line TEL / DSL or 10Base T Ethernet protection
PHYSICAL
Installation form factors
supported with included
accessories
supported with included
accessories
Tower