Sanyo Portable Networkable LCD Projector PLC-XP55 PLC-XP55 Leaflet

Distributed by:

10.0

17.5

41*

429.5

319

168

91.5

10.5˚

Min. Zoom

Max. Zoom

Min. Zoom

Max. Zoom

400

—

14.7

—

14.4

300

14.2
11.0
14.3
10.8

200

9.5
7.3
9.5
7.2

100

4.7
3.6
4.7
3.6

80

3.7
2.9
3.7
2.8

60

2.8
2.1
2.8
2.1

150

7.1
5.5
7.1
5.4

120

5.6
4.3
5.7
4.3

40

1.8
1.4
1.8
1.4

PLC-XP55

PLC-XP50

(Unit: mm)

*PLC-XP55 Only

(ratio of throw distance to brightness)

                    (motor-driven adjustment)

Approx. throw 
distance (m)

Stack point: with minimum zoom

LCD colour data projector

Adjustable from 31 inches to 400 inches

35 dBA

*

1

800 TV lines (HDTV)

Three 1.3” TFT p–Si active matrix type

1,024 x 768 dots

2,359,296 (786,432 x 3)

X-type prism system

300 W NSH lamp

Stereo, 2 W rms

2 pieces (ø 50 mm)

10:0 –1:1

Class

650 

±

20 nm

1 mW max.

319 (W) x 168 (H) x 429.5*

2

 (D) mm 

100–240 V AC, 50 Hz/60 Hz auto change

Automatic frequency control   H sync: 15–100 kHz, V sync: 50–100 Hz   Dot clock: 180 MHz

PAL/SECAM/NTSC/NTSC-4.43/PAL-M/PAL-N

Computer input: 1 mini D-sub 15-pin (Analog RGB) or 1 DVI-D (Digital)    Audio: 1 stereo mini jack

Computer/Video input: 5 BNC (Video or Y/Cb/Cr or Y/Pb/Pr or RGBHV)    Audio: 1 stereo mini jack 

Video input: 3 RCA (Video/Y-Cb/Pb-Cr/Pr), 1 S-Video                                 Audio: 2 RCA

Control port: Mini DIN 8-pin, USB Type B

Wired remote control: stereo mini jack

• Wired remote jack (Mini jack) • Wireless/Wired Remote Control Unit (Air pad remote) 

• AC power supply cord • Computer cable (VGA) • MAC adaptor 

• PC control cable (PS2/MAC/SERIAL) • Dust cover • Lens cover • Owner’s manual

Expansion port (for POA-PN02)

3,700 lm

850:1

From 1.4 m–14.4 m (100” at 3.6–4.7 m)

F/1.8–2.1, f = 48.4– 62.8 mm

8.7 kg (19.2 lbs.)

 450 W

Yes

 310 W

±

LAN interface

Network protocol

Serial interface

Power source

Power consumption

Dimensions (W x H x D)

Weight

Built-in battery

Operating temperature

Storage temperature

Applicant regulation 

IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX)

Data transfer speed 

10 Mbps/100 Mbps

Data transfer mode 

Half duplex/Full duplex

Terminal 

8-pin modular (RJ-45)

TCP/IP specification 

TCP/IP

RS-232C

Baud rate 

0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/
115.2 kbps

Flow control 

Hardware flow control 
(RTS/CTS, Xon/Xoff)

Parity check 

Odd/Even

Terminal 

D-sub 9-pin (male)

Supplied from the projector

3.0 W

105 x 33.6 x 132 mm

258 g (0.57 lbs.)

Lithium battery, Type CR2032, 3.0 V

41˚F – 95˚F (5˚C – 35˚C)

14˚F – 140˚F (-10˚C – 60˚C)

• OS: Windows

®

 95/98/Me/NT4.0/2000/XP, Mac OS 8.0 or later

• Network environment: Ethernet in normal operation and TCP/IP 

protocol capability

• Computer environment: 10 Base – T/100 Base – XT network card
• Web browser: Internet Explorer 5.0 or later, Netscape

®

 Navigator 

4.7 or later

• Internet mail software: 

Microsoft

®

 Outlook/Outlook Express, Netscape

®

 Mail

Note: Specifications are subject to change without notice.

400”

308”

300”

200”

100”

Center 
of lens

H1

H2

231”

154”

77”

80”

62”

60”

40”

31”

46”

Automatic Adjustment Matched to the Image
Provides real-time correction of bright-
ness levels in response to on-screen 
movement and light sources inside and 
out of the presentation venue. Automat-
ically detects on-screen luminance and 
adjusts the gamma level to maintain nat-
ural-looking gradations in projected im-
ages even during scenes that vary be-
tween being too light or too dark.

Projector

Projector

Projector

Projector

Ethernet

Auto-Play 
of Server 
Displayed 
Images

Multi-Control

Possible

Image Data

Transmission

RS-232

Cellular Phone

E-Mail Notification
Alarm

Control / Administration     Image Data Transmission

4,500 lm

1,100:1

From 1.4 m–14.7 m (100” at 3.6–4.7 m)

F/1.7–2.0, f = 48.2– 62.6 mm

9.2 kg (20.3 lbs.)

SML036

*

1

Eco mode: Brightness is approximately 80 percent of normal levels.  *

2

Excluding protrusions

Safety Precautions
• Do not install the LCD projector in areas exposed to water, humidity, dust, oil or smoke or in close proximity to heat sources. Make sure the heat vents are not blocked. Fire, electrical shock or unit 
malfunction may result if the above precautions are neglected. • Do not look through the lens while projecting as damage to the eyes could result. Take special care when children are close by. 
• Do not look at the laser beam coming out of the remote control unit or direct the laser beam toward a person. Direct contact with the laser beam may cause damage to the eyes.
Remarks
• Spare LCD projector parts are kept in stock at least for eight years after the product is discontinued. • LCD panel manufacturing requires extremely 
high-precision technology with pixels having a 99.99% quality control rating. However, there does exist a 0.01% or smaller possibility of dead pixels 
or constantly lit pixels. • Please note that product colours in the brochure may differ slightly from those of actual products. • All screen pictures in the 
catalog are simulated. • All company and product names are the trademarks or registered trademarks of respective owners. • Product appearance 
and specifications subject to change without notice.

Caution: please consult the instruction manual to ensure safe and proper operation of the product.

Commercial Division, Sanyo UK Sales,
Sanyo House, Otterspool Way, Watford, Herts, WD25 8JX 
Telephone: 01923 477220  Fax: 01923 477225
Email: lcdprojectors@sanyo.co.uk  Website: www.sanyo.co.uk