Panasonic CU-2E15GBE User Manual

 

58 

Fig. 1 

Fig. 2 

Fig. 3 

 
 
 
 
 
 
 
 

•  Lift to open the vertical vent gently. Remove the 2 caps and 2 screws at 

the bottom of discharge vent. (Fig. 1) 

 

•  Remove the Front Grille by releasing the 3 hooks at the top of the Front 

Grille. Hold both sides of the Front Grille and remove it by pulling up 
and towards you gently. (Fig. 1)  

 
 
 
 
 
 
 
 
 

•  Unhook the tabs at the Control Board to remove the Control Board 

Cover. (Fig. 2) 

 
 
 
 
 
 
 
 
 
 
 
 
 

•  Release the Indicator by detaching the CN-DISP and CN-LED, and 

then remove the Indicator from the 2 tabs. (Fig. 3) 

 
 
 
 
 
 
 
 
 

 
 

•  When handling electronic controller, be careful of electrostatic discharge. 

•  Be sure to return the wiring to its original position. 

•  There are many high voltage components within the heat sink cover, so never touch the interior during 

operation. Wait at least two minutes after power has been turned off.