Panasonic CU-2E15GBE User Manual

65 

1.  Remove the cabinet top plate (by removing the 4 screws). 
2.  Remove the 5 screws fixing the cabinet front plate, release 6 hooks 

and pull the cabinet front plate toward front side. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3.  Remove the control board cover (remove 1 screw) 
4.  Remove the terminal cover (remove 2 screws) 
5.  Remove the terminal cover (top) and disconnect all the lead wires 

(3 fasten tab) inside. 

 
 
 
 
 
 
 
 
 
 

6.  Remove the control board cover. 
7.  Remove the 6 screws at the positions on the control board 

indicated by arrows 

8.  Disconnect the connectors and pipe sensor connected to the 

compressor and reactor. 

9.  Remove the control board. 

 
When pulling the control board upward, it may not be possible to 
remove it because of the way in which the ground wire and other 
wires are routed. In this case, it is removed after the control board 
cover itself has been removed.