ZyXEL Wireless Access Point G1000 91-005-124003B User Manual
Product codes
91-005-124003B
G-1000 User’s Guide
110
Chapter 15 SNMP Configuration
C
H A P T E R
15
SNMP Configuration
This chapter shows you how to use SMT to configure SNMP on the G-1000.
To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP
Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP
terminology for password.
Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP
terminology for password.
Figure 62 Menu 22 SNMP Configuration
The following table describes the SNMP configuration parameters.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 47 Menu 22 SNMP Configuration
FIELD
DESCRIPTION
SNMP:
Get Community
Type the Get Community, which is the password for the incoming Get- and
GetNext requests from the management station.
Set Community
Type the Set Community, which is the password for incoming Set requests from
the management station.
Trusted Host
If you enter a trusted host, your G-1000 will only respond to SNMP messages from
this address. A blank (default) field means your G-1000 will respond to all SNMP
messages it receives, regardless of source.
Trap:
Community
Type the trap community, which is the password sent with each trap to the SNMP
manager.
Destination
Type the IP address of the station to send your SNMP traps to.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.