ZyXEL Wireless Access Point G1000 91-005-124003B User Manual
Product codes
91-005-124003B
G-1000 User’s Guide
38
Chapter 3 Introducing the Web Configurator
5
Release
the RESET
button and wait for the G-1000 to finish restarting.
3.2.2 Method of Restoring Factory-Defaults
You can erase the current configuration and restore factory defaults in three ways:
Use the RESET button on the side panel of the G-1000 to upload the default configuration file
(hold this button in for about 10 seconds or until the SYS LED, LINK LED or BDG/RPT
LED turns red). Use this method for cases when the password or IP address of the G-1000 is
not known.
(hold this button in for about 10 seconds or until the SYS LED, LINK LED or BDG/RPT
LED turns red). Use this method for cases when the password or IP address of the G-1000 is
not known.
Use the web configurator to restore defaults (refer to
Transfer the configuration file to your G-1000 using FTP. See later in the part on SMT
configuration for more information.
configuration for more information.
3.3 Navigating the G-1000 Web Configurator
The following summarizes how to navigate the web configurator from the MAIN MENU
screen.
screen.
Note: Follow the instructions you see in the MAIN MENU screen or click the
icon (located in the top right corner of most screens) to view online help.
Note: The
Note: The
icon does not appear in the MAIN MENU screen.
Figure 6 The MAIN MENU Screen of the Web Configurator
Click WIZARD SETUP for initial configuration including general setup, Wireless LAN
setup and IP address assignment.
setup and IP address assignment.