ZyXEL Wireless Access Point G1000 91-005-124003B User Manual
Product codes
91-005-124003B
G-1000 User’s Guide
Chapter 6 Wireless LAN
67
Figure 24 Wireless LAN: 802.1x/WPA for WPA2 Protocol
The following table describes the labels not previously discussed
Please
for information on the additional fields shown in this screen.
6.7.5 Authentication Required: WPA2-PSK
Select Authentication Required in the Wireless Port Control field and WPA2-PSK in
the Key Management Protocol field to display the next screen.
the Key Management Protocol field to display the next screen.
Table 20 Wireless LAN: 802.1x/WPA2 for WPA Protocol
LABEL
DESCRIPTIONS
Key Management
Protocol
Choose WPA2 in this field.
WPA Compatible
Check this box if you want your G-1000 to support WPA2 and WPA at the same
time. This might reduce the performance of the device, however.
WPA Group Key
Update Timer
The WPA Group Key Update Timer is the rate at which the AP (if using WPA2-
PSK key management) or RADIUS server (if using WPA2 key management)
sends a new group key out to all clients. The re-keying process is the WPA2
equivalent of automatically changing the WEP key for an AP and all stations in a
WLAN on a periodic basis. Setting of the WPA Group Key Update Timer is also
supported in WPA2-PSK mode. The G-1000 default is 1800 seconds (30 minutes).
Authentication
Databases
This field is disabled.
Apply
Click Apply to save your changes back to the G-1000.
Reset
Click Reset to begin configuring this screen afresh.