ZyXEL Wireless Access Point G1000 91-005-124003B User Manual

G-1000 User’s Guide

Chapter 8 Remote Management Screens

75

Figure 30   Remote Management: Telnet

The following table describes the labels in this screen.

You can upload and download the G-1000’s firmware and configuration files using FTP, 
please see the chapter on firmware and configuration file maintenance for details. To use this 
feature, your computer must have an FTP client.

To change your G-1000’s FTP settings, click REMOTE MGMT, then the FTP tab. The 
screen appears as shown.

Table 26   Remote Management: Telnet

Server Port

You may change the server port number for a service, if needed; however, you must 

use the same port number in order to use this service for remote management.

Server Access

Select the interface(s) through which a computer may access the G-1000 using this 

service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the G-

1000 using this service. 
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the G-1000 using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.