ZyXEL Wireless Access Point G1000 91-005-124003B User Manual
Product codes
91-005-124003B
G-1000 User’s Guide
96
Chapter 11 Introducing the SMT
11.4 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your G-
1000. Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.
1000. Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.
24 System Maintenance 24.1 Status
24.2 System Information and Console
Port Speed
24.2.1 Information
24.2.2 Change Console Port
Speed
24.3 Log and Trace
24.3.1 View Error Log
24.4 Diagnostic
24.5 Backup Configuration
24.6 Restore Configuration
24.7 Upload Firmware
24.7.1 Upload System
Firmware
24.7.2 Upload System
Configuration File
24.8 Command Interpreter Mode
24.10 Time and Date Setting
24.11 Remote Management Control
Table 38 SMT Menus Overview (continued)
MENUS
SUB MENUS
Table 39 Main Menu Commands
OPERATION
KEYSTROKE
DESCRIPTION
Move down to
another menu
[ENTER]
To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
Move up to a
previous menu
[ESC]
Press [ESC] to move back to the previous menu.
Move to a “hidden”
menu
Press [SPACE BAR]
to change No to Yes
then press [ENTER].
Fields beginning with “Edit” lead to hidden menus and
have a default setting of No. Press [SPACE BAR] once to
change No to Yes, then press [ENTER] to go to the
“hidden” menu.
Move the cursor
[ENTER] or [UP]/
[DOWN] arrow keys.
Within a menu, press [ENTER] to move to the next field.
You can also use the [UP]/[DOWN] arrow keys to move to
the previous and the next field, respectively.
Entering information Type in or press
[SPACE BAR], then
press [ENTER].
You need to fill in two types of fields. The first requires you
to type in the appropriate information. The second allows
you to cycle through the available choices by pressing
[SPACE BAR].
Required fields
<
?
> or ChangeMe
All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.