HP 3830 B7E01A User Manual

Dimensions (H x W x D)
(with bezel)

7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)

Weight (approximate)

Maximum: all processors,
16 DIMMs, hard drives,
mezzanine cards, and two
flash cache batteries
installed)

14.00 lb (6.33 kg)

Minimum: one processor
and 2 DIMMs installed

10.50 lb (4.75 kg)

For power specifications including input requirements, BTU rating, and power
supply output, please see the:

HP BladeSystem c3000 Enclosure QuickSpecs at

HP BladeSystem c7000 Enclosure QuickSpecs at

To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at 

Operating

10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1,000 ft) above sea level to a maximum
of 3,050 m (10,000 ft), no direct sustained
sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and
number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).

Operating

10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.

Non-operating

5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.

Operating

10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be limited
by the type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).

Technical Specifications

DA - 14457   North America — Version 5 — April 18, 2014

Page  40