ZyXEL PoE Access Point NWA1123-NI-EU010 User Manual

Product codes
NWA1123-NI-EU010
Page of 4
2
Easy to RF planning with the same 2.4 GHz and 5 GHz signal coverage (NWA1123-NI)
There are many 802.11g Wi-Fi devices around us and they are making the 2.4 GHz frequency extremely crowded. Worse yet, only three non-overlapping 
channels are available and they may conflict with each other to cause network traffic jam.
The ZyXEL NWA1123-NI 802.11 a/b/g/n Dual-Radio PoE AP consists of 2.4 GHz and 5 GHz dual-band radio to match the concurrent Wi-Fi services with 
either frequency. As more and more recent mobile or laptop devices support both 2.4 GHz and 5 GHz bands, users can choose 5 GHz as the first priority 
for default searching and balance heavy network loading with the 2.4 GHz band.
The higher frequency of the 5 GHz band provides a shorter signal range compared to the 2.4 GHz band with the same transmit output power. The 
NWA1123-NI consist of high 5 GHz transmit output power can boost the 5 GHz signal range, providing signal coverage equal to the 2.4 GHz wireless 
network. Therefore, the complexity of deployment can be considerably reduced. 
8/16 SSID for comprehensive user management
In different public environments, the administrators may use VLAN switches to separate the traffics from different type of users; as such different group 
of users may need independent Wi-Fi security settings too. The ZyXEL NWA1121-NI provides up to 8 SSIDs and the NWA1123-NI provides up to 16 SSIDs 
(dual-band) to map the VLAN security level settings to classify users for different application services, such as public Internet access or restricted Web 
contents. This function allows businesses to make consistent user management in wireless edge.
Model
NWA1121-NI
NWA1123-NI
Product name
802.11 b/g/n Ceiling Mount
PoE Access Point
802.11 a/b/g/n Dual-Radio
Ceiling Mount PoE Access Point
Main Design
Wireless frequency
2.4 GHz
2.4 GHz & 5 GHz
Radio
1
2
RF Specifications
Frequency band
2.4 GHz
• 2.4 GHz (IEEE 802.11 b/g/n)
• USA (FCC): 2.412 to 2.462 GHz
• Europe (ETSI): 2.412 to 2.472 GHz 
• Taiwan (TW): 2.412 to 2.462 GHz
• 2.4 GHz (IEEE 802.11 b/g/n)
• USA (FCC): 2.412 to 2.462 GHz
• Europe (ETSI): 2.412 to 2.472 GHz 
• Taiwan (TW): 2.412 to 2.462 GHz
5 GHz
-
• 5 GHz (IEEE 802.11 a/n)
• USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz
• Europe (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 
GHz
• Taiwan (TW): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz
802.11n
• 2x2 multiple-input multiple-output (MIMO) with  
two spatial streams 
• Maximal ratio combining (MRC) 
• 20- and 40-MHz channels 
• PHY data rates up to 300 Mbps 
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU  
(Tx/Rx) 
• Cyclic Delay Diversity (CSD) support
• Transmit Beamforming (TxBF) support
• Maximum Likehood Demodulation (MLD) 
support
• Low Density Parity Check (LDPC) support
• 2x2 multiple-input multiple-output (MIMO) with  
two spatial streams 
• Maximal ratio combining (MRC) 
• 20- and 40-MHz channels 
• PHY data rates up to 600 Mbps (combined rates)
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU  
(Tx/Rx) 
• Cyclic Delay Diversity (CSD) support
• Transmit Beamforming (TxBF) support
• Maximum Likehood Demodulation (MLD) 
support
• Low Density Parity Check (LDPC) support
Specifications
NWA1120 Series
802.11n Ceiling Mount PoE Access Point