Omnitron iConverter Modular T1/E1 Multiplexer 2422-0-T User Manual

Product codes
2422-0-T
Page of 4
iConverter
iConverter
®
 
■ Modular system multiplexes up to sixteeen independent  
T1/E1 circuits and 10/100/1000 Ethernet over fiber or 
Ethernet Virtual Connection (EVC)
 
■ Multiple groups of mux modules can be installed in the  
same chassis
 
■ Remotely-managed configuration and testing enables 
rapid deployment
 
■ Manageable via SNMP with Omnitron’s NetOutlook
®
 
Management Software or third party software
 
■ CLI management interface via TELNET or serial port
 
■ Optional connectivity to adjacent Ethernet switch modules
 
■ Commercial (0 to 50º C ) and wide (-40 to 60º C) 
operating temperature ranges
iConverter
 
Fiber Transport Modules
 
■ Fiber Transport modules are available for point-to-point 
Ethernet or Carrier Ethernet Virtual Connection (EVC) 
 
■ Small Form Pluggable (SFP) or fixed fiber transceivers, in 
standard and CWDM wavelengths
 
■ Multimode, single-mode dual fiber and single-mode 
single-fiber options.
iConverter
 
4xT1/E1 MUX Modules
 
■ In-band T1 loop-back
 
■ Out-of-band local loop-back on the copper and fiber ports, 
remote fiber loop-back and circuit test modes 
 
■ Supports balanced T1/E1 or unbalanced E1
 
■ Configurable alarm relay contacts for audio/visual fault 
notification
 
■ 24 hour T1/E1 statistic logging
 
■ Optional external I/O clock port
iConverter
  
Modular T1/E1 Multiplexer
T1/E1 and Ethernet Managed Multiplexer System
The  iConverter Modular T1/E1 Multiplexer transports up to 
sixteen T1/E1 circuits and 10/100/1000 Ethernet over point-
to-point fiber, CWDM channel or Ethernet Virtual Connection 
(EVC).  This flexible and scalable system is comprised of an 
iConverter Fiber Transport module, and one or more iConverter 
4xT1/E1 MUX modules installed in a 2, 5 or 19-module chassis.  
Each  iConverter  Fiber  Transport  module  and  up  to  four 
contiguous iConverter 4xT1/E1 MUX modules combine to form 
a MUX group.  A MUX group can connect with another MUX 
group at the opposite end of a dedicated fiber link or EVC.   
A MUX group can also interoperate with a Managed iConverter 
fixed-configuration T1/E1 Multiplexer. 
Multiple MUX groups can be installed in a chassis, enabling 
high-density, star-topology deployments.
There  are  three  Fiber  Transport  modules  available:  the 
iConverter TM3, the iConverter GM3 NID plug-in module and 
the iConverter GM4 NID plug-in module.  The TM3 supports 
Ethernet Link OAM with IEEE 802.3ah.  The GM3 and GM4 
NID modules support Carrier Ethernet Service OAM with IEEE 
802.1ag Connectivity Fault Management and ITU-T Y.1731 
Performance  Monitoring.    See  the  fiber  transport  module 
comparison table on page 2 for more information.
The Fiber Transport module is available with fixed-fiber or Small 
Form Pluggable (SFP) transceivers, and feature two Ethernet 
backplane ports for additional Ethernet connectivity to adjacent 
modules.  A common application of this feature is to combine a 
4-Port switch module in the adjacent slot to provide a solution 
with four additional 10/100/1000 ports. 
The iConverter 4xT1/E1 MUX module supports four copper 
RJ-48 ports for balanced T1/E1 applications.  Adapter cables 
are available to convert each RJ-48 interface to a BNC interface 
for unbalanced E1 transport applications.  
The 4xT1/E1 MUX module features an optional external clock 
port that can be configured as a clock input or output.  As an 
input, the port can be connected to an external clock source, 
such  as  a  GPS  receiver,  to  provide  a  common  reference 
clock for the module.  As an output, the port can provide the 
recovered T1/E1 clock from port 1 to other TDM equipment 
at the site. 
The T1/E1 Multiplexer modules are part of the iConverter multi-
service platform, and can be installed in a chassis equipped 
with iConverter Network Interface Devices, media converters, 
transponders  and  CWDM  multiplexers.   The  multi-service 
platform  is  capable  of  delivering  Ethernet,  TDM,  SONET 
and other services across a Wide Area Network.  iConverter 
modules can be added to this scalable architecture to expand 
bandwidth capacity and add new services.
KEY FEATURES