Panasonic WV-CW864 User Manual

24

5. To set pan limit ON/OFF

Move the cursor to PAN LIMIT and select ON or OFF by mov-
ing the joystick to the right or left.
The factory default setting is OFF.

Manual pan is limited from the starting point to the end-

point specified by position setting. Set ENDLESS to OFF
before PAN LIMIT is set to ON.

Manual pan is not limited.

When ON is selected for PAN LIMIT, manual pan moves the

camera away from the other side (PAN LIMIT) of the start-end
range.

6. To set ENDLESS to ON/OFF

Move the cursor to ENDLESS, and select ON or OFF by moving
the joystick to the right or left.
The factory default setting is OFF.

The camera pans from the starting point to the endpoint, and

keeps rotating in the same direction to return to the starting
point. Set PAN LIMIT to OFF before ENDLESS is set to ON.

The camera pans from the starting point to the endpoint,

and rotates backward to the starting point.

This movement is repeated over and over.

7. To set a dwell time

Move the cursor to DWELL TIME and select a dwell time by mov-
ing the joystick to the right or left.
The factory default setting is 1S.
Dwell time changes as follows:

• When the panning, tilting, zooming or focusing in the SEQ,

SORT or PATROL mode is controlled manually, the Auto
mode function should be cancelled.
To activate the auto mode, select the desired auto mode
again or set a time for SELF RETURN in the SET UP menu.

• When 0S is selected, the camera stops without dwelling and

starts.

• Auto refreshing may be activated during the patrol play or the

auto mode to calibrate the lens position.

START
END
••••|••••
L       H
OFF
ON
1S

START
END
••••|••••
L       H
OFF
OFF
1S

0S

1S

2S

3S

30S

5S

10S

20S

Camera

Endpoint

Starting point

Start-end
range of
auto pan

Self-end 
range of
pan limit