Lapara LA-ITR-1500-LCD Leaflet

Page of 1
MODEL
LA-ITR-800
LA-ITR-1100 LA-ITR-1500 LA-ITR-2000 LA-ITR-2500 LA-ITR-3000
CAPACITY
800VA / 640W 1100VA / 880W1500VA / 1200W
2000VA / 1600W
2500VA / 2000W
3000VA / 2400W
Voltage
Voltage Range
Frequency Range
Voltage regulation (AC Mode)
Voltage regulation (Battery Mode)
Frequency Range (Battery Mode)
Current Crest Ratio
Harmonic Distortion
Transfer Time
Waveform (Battery Mode)
Type & Number
12V/7AH x 2
12V/9AH x 2
12V/7AH x 4
12V/9AH x 4
12V/7AH x 6
12V/9AH x 6
Charging Voltage
Backup Time (50% load)
10 min.
10 min.
13 min
13 min
14 min
12 min
Typical Recharge Time
Charging current (max)
4A / 8A
4A / 8A
4A / 8A
Charging Voltage
27.4 VDC ±1%
54.8 VDC ±1%
82.1 VDC ±1%
LCD Display
Full Protection
Battery Mode
Low Battery
Overload
Fault
Power Output
Communication Ports
Dimensions, DxWxH (mm
Net Weight (Kg)
12.90
14.23
21.08
23.11
30.65
32.24
Dimensions, DxWxH (mm
380 x 438 x 88
480 x 438 x 88
600 x 438 x 88
Net Weight (Kg)
10.8
14
18
Humidity
Noise Level
USB & RS-232 Suppported OS
Optional SNMP
* Specifications are subject to change without further notice
Power management from SNMP manager and web browser
--
--
--
6 x IEC
8 x IEC
ALARM
PROTECCTION
380 x 438 x 88
Sounding every 0.5 seconds 
Continuously sounding
600 x 438 x 88
110/120 VAC or 208/220/230/240 VAC
3:1
5% máx @ 100% linear load, 10% máx @ 100% non-linear load (before alarm)
27.4 VDC ±1%
54.8 VDC ±1%
82.1 VDC ±1%
60 Hz or 50 Hz  ±1 Hz
Typical 2-6 ms, 10ms max
Pure Sine Wave
Supports Windows® 2000/2003/XP/Vista/2008/7, Linux, Unix & MAC 
SOFTWARE
--
ENVIRONMENT
--
--
±1% (before battery alarm)
Long-run 
Model
0-90 % RH @ 0- 40°C (non-condensing)
Less than 45dB
Standard 
Model
Long-run 
Model
1xUSB + RS-232 + 1xRJ11
480 x 438 x 88
Standard 
Model
AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, 
Overload, Fault and Low Battery
PHYSICAL
Overload, discharge and overcharge protection
Sounding every 10 seconds
Sounding every second
INTERFACE
INDICATORS
BATTERY
LA-ITR
INPUT
LA-ITR LINE INTERACTIVE UPS
4 hours recover to 90% capacity
OUTPUT
110/120 VAC or 208/220/230/240 VAC
81-145 VAC  /   162-290 VAC
60/50 Hz (auto sensing)
• Rack/Tower desigh, with easy-shift LCD display
•  Excellent microprocessor control guarantees high reliability
• Built-in boost & buck AVR
• Pure sinewave output
• Output power factor: 0,8
• Programmable power management outlets
• ECO operationi for energy saving (Efficiency Corrective 
Optimizer) 
• Emergency Power Off Function (EPO)
• Multiple communication ports available: USB, RS-232, SNMP,...
• Hot-swappable battery design