Allied Telesis AT-x610-24Ts/X-POE+ AT-X610-24TS/X-POE-NCB3 User Manual

The Allied Telesis x610 Series is the high performing and scalable 

solution for today’s networks, providing an extensive range of 
port-density and uplink-connectivity options. 

With a choice of 24-port and 48-port 

versions and optional 10 Gigabit uplinks, 
plus the ability to stack up to eight units, 
the x610 Series can connect anything 
from a small workgroup to a large 
business. 

The x610 Series features fully non-

blocking switching on all ports, so IPv4 
and IPv6 Layer 2 switching and Layer 3 
routing occur at wirespeed with low 
latency. This is ideal for high-end server 
deployments, and, when combined 
with a large Layer 3 route table, for 
aggregating Gigabit connections. 

Meeting the increased management 
requirements of modern converged 
networks, Allied Telesis Management 
Framework (AMF) automates many 
everyday tasks including configuration 
management. The complete network 
can be managed as a single virtual device 
with powerful centralized management 
features. Growing the network can 
be accomplished with plug-and-play 
simplicity, and network node recovery is 
fully zero-touch.      

The x610 Series provides uninterrupted 

access to online applications by 
implementing a network with no single 
point of failure. Distributing resources 
across a stacked group of units means 

no network downtime. A fully resilient 
solution is created with VCStack

™ 

(Virtual Chassis Stacking), where up 

to eight units can form a single virtual 
chassis with dual connections to key 
servers and access switches. VCStack 
can be implemented in the same cabinet 
over copper cabling, or to remote 
locations using fiber.

Allied Telesis EPSRing

™

 (Ethernet 

Protection Switched Ring), technology 
provides a high performing resilient 
design for distributed networks. A high-
speed solution where recovery occurs 
within as little as 50ms can be deployed 
in ring-based topologies. Several 
switches can form a protected ring, 
running at up to 10Gbps. 

The flexibility of the x610 Series, coupled 

with the ability to stack multiple units, 
ensures a future-proof network. The 
choice of 24-port and 48-port versions 
and Gigabit or 10 Gigabit uplink ports 
enables uplink bandwidth to be tailored 
to suit network applications. Expansion 
modules are available for local and 

long-distance stacking. Long-distance 
expansion modules can be configured to 
provide two additional 10G ports.

Flexible endpoint deployment is ensured 
with the ability to power devices such 
as IP phones, security cameras, and 
wireless access points directly from the 

switch. This convergence of voice, video 
and data on today’s networks is enabled 
by Power over Ethernet Plus (PoE+), 
which delivers the added benefit of 
reducing costs. 

Multiple customers can have their own 
secure virtual network within the same 
physical infrastructure, as the x610 
Series switches are able to divide a 
single router into multiple independent 
virtual routing domains. Layer 3 network 
virtualization provided by Virtual Routing 
and Forwarding (VRF Lite) creates 
independent routing domains, where IP 
addresses can overlap without causing 
conflict.

A secure network environment is 

guaranteed, with powerful control 
over network traffic types, secure 

management options, and other multi-
layered security features built into the 

x610 Series switches.

New Features

 

» Allied Telesis Management Framework (AMF)

 

» BGP4

+

 for IPv6

.com

x610 Series

Switches