Panasonic WV-SW458M WVSW458M Leaflet

• 360° monitoring with a wide variety of transmission modes:

   Wall Panorama, Double Panorama, Quad PTZ, Single PTZ, 

   and Quad streams (H.264/VGA)

• 1080p Full HD images up to 30 fps.

• Combining enhanced “UniPhier

®

”, Panasonic’s proprietary System 

LSI platform and 2 areas VIQS (Variable Image Quality on Specified 

area) function can decrease maximum 50%

*1 

network bandwidth.

• Multiple H.264 (High profile) streams and JPEG streams ensure simultaneous 

real time monitoring and high resolution recording by enhanced “UniPhier

®

.

• Smooth PTZ operation without mechanical action

• Built-in distortion correction function

• A fish-eye lens control function realizes intelligible screen operation intuitively. 

• Smartphone monitoring : Direct camera control from smartphone

• Super Dynamic and ABS (Adaptive Black Stretch) technologies deliver 

128x wider dynamic range compared to conventional cameras.

• High sensitivity with Day/Night (Electrical) function:1.5 lx (Color), 1.2 lx (B/W) at F2.4

• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.

• Progressive scan ensures clear images with less motion blur and no 

tearing even when the subject is moving.

• Superior color reproduction by primary (RGB) color filter.

• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF

• Selectable light control modes: Indoor scene (50 Hz) / Indoor scene (60 Hz) 

/ ELC (maximum exposure time)

   Indoor scene (50 Hz/60Hz): Flicker caused by fluorescent lightning will 

be automatically compensated.

   ELC (maximum exposure time): The lightning control will be automatically 

performed by adjusting shutter speed in the range of ELC.

• VMD (Video Motion Detector) with 4 programmable detection areas, 

15 steps sensitivity level and 10 steps detection size 

• Face detection function detects the position of human face and the 

information is sent by XML or video stream.

• Privacy Zone can mask up to 4 private areas, such as house 

windows and entrances/exits.

• Camera title display: Up to 20 alphanumeric characters on the browser

• Alarm sources including 3 terminal input, VMD and Panasonic alarm 

command can trigger actions such as SDXC/ SDHC/SD memory 

recording, FTP image transfer, E-mail notification, Indication on 

browser, Alarm terminal output, and Panasonic protocol output.

• Full duplex bi-directional audio allows interactive communication 

between camera site and monitoring site.

• JPEG image compression ratio can be changed by alarm so that 

higher quality image can be provided.

• Prioritized stream control: One of the video streams can be prioritized 

when multiple recorders or client PCs are accessing the camera so that 

the recorder or the client PC can maintain the frame rate.

• SDXC/SDHC/SD Memory card slot for manual recording (H.264 / JPEG), 

alarm recording (H.264 / JPEG) and backup upon network failure (JPEG)

• H.264 max. bit rate/client and Total bit rate control allows flexible 

network traffic management. Frame rate priority mode controls bit 

rate and compression ratio to provide the specified frame rate.

• Internet mode: H.264 images can be transmitted over HTTP protocol.

• Multi-language: English / Italian / French / German / Spanish / 

Russian / Chinese / Japanese

• IPv4/IPv6 protocol supported

• Supports SSL, DDNS (viewnetcam, RFC2136)

• Still images (JPEG) can be viewed on mobile phones via Internet.

• IP66 rated water and dust resistant. Compatible with IEC60529 

measurement standard.

• Dehumidification device for use in various weather conditions

• Operating temperature –40 °C ~ +50 °C (–40 °F ~ 122 °F)

• Vandal resistant mechanism for high reliability

• “Railway applications – Electronics equipment used on rolling  

stock” compatible with EN50155

• Low profile design for discrete installation

*1 Compared with WV-NP502, reduction effect is decreased by object and image quality setting conditions

• Installation Guide ..........................1 pc.

• CD-ROM*

1

 .....................................1 pc.

The following is used during installation procedures:

• Camera attachment ......................1 pc.

• Base cover <SW458>....................1 pc.

• Mount bracket <SW458>...............1 pc.

• Installation template label <SW458M>

   ...................................................... 1 pc.

• Waterproof tape ........................... 1 pc.

• Code label*

2

 ...................................1 pc.

• Fixing screws (M4 x 8 mm) <SW458> 

   ...................5 pcs. (of them, 1 for spare)

• 4P alarm cable ............................. 1 pc.

• 2P power cable ............................ 1 pc.

• Bit for tamperproof screw ............ 1 pc.

*1 The CD-ROM contains the operating installations and installation guide (PDF).

*2 This label may be required for network management.   The network administrator shall retain the 

code label.

VIQS