Panasonic PT-DZ680ULS User Manual
66 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
[DISPLAY OPTION] menu
Select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
r
f
After selecting the item, press asqw to set.
[COLOR MATCHING]
You can correct the color difference between the sets when multiple sets are to be used simultaneously.
To adjust the color matching as desired
1)
Press as to select [COLOR MATCHING].
2)
Press qw to switch [COLOR MATCHING].
r
f
The setting will change among [OFF], [3COLORS], [7COLORS]
and [MEASURED] each time you press the button.
3)
Select [3COLORS] or [7COLORS], and press
the <ENTER> button.
r
f
The
[3COLORS] or [7COLORS] screen is displayed.
4)
Press as to select [RED], [GREEN] or [BLUE]
([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],
[YELLOW], or [WHITE] for [7COLORS]).
5)
Press the <ENTER> button.
r
f
The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE],
or [3COLORS:WHITE] screen is displayed.
In the case of [7COLORS], the [7COLORS:RED],
In the case of [7COLORS], the [7COLORS:RED],
[7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN],
[7COLORS:MAGENTA], [7COLORS:YELLOW], or
[7COLORS:WHITE] screen is displayed.
6)
Press as to select [RED], [GREEN], or [BLUE].
r
f
If [WHITE] is selected from [3COLORS], only [GAIN] can be
adjusted.
7)
Press qw to adjust.
r
f
Adjustment value will change between 0
*
and 2 048.
* The lower limit differs depending on the color to be adjusted.
r
r
[COLOR MATCHING]
[OFF]
Color matching adjustment is not carried out.
[3COLORS]
The three colors [RED], [GREEN], and [BLUE] can be adjusted.
[7COLORS]
The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], and [WHITE] can be
adjusted.
[MEASURED]
Refer to “To adjust the color matching using a colorimeter” (x page 66) for details about this mode.
Note
r
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
r
f
This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
r
f
Pressing the <DEFAULT> button will restore the factory default settings for all items.
r
f
When [COLOR MATCHING] is set to other than [OFF], [AI] and [COLOR CORRECTION] are fixed to [OFF], and [COLOR TEMPERATURE]
is fixed to [USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)
To adjust the color matching using a colorimeter
Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], and [WHITE] to desired colors.
1)
Press as to select [COLOR MATCHING].
2)
Press qw to select [MEASURED].
3)
Press the <ENTER> button.
r
f
The
[MEASURED MODE] screen is displayed.
4)
Press as to select [MEASURED DATA].