Panasonic PT-DZ680ULS User Manual
ENGLISH - 87
Chapter 4 Settings — [SECURITY] menu
[SECURITY] menu
Select [SECURITY] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
r
f
When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
Initial password: Press awsqawsq in order, and press the <ENTER> button.
r
f
After selecting the item, press asqw to set.
Attention
r
f
When you select the [SECURITY] from the main menu and press the <ENTER> button, entering a password is required. Enter the set
password and then continue operations of the [SECURITY] menu.
r
f
When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
r
f
The entered password is displayed with * mark on the screen.
[SECURITY PASSWORD]
The
[SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be
restricted to the power standby <v> button, the <SHUTTER> button, and the <LENS> (<FOCUS>, <ZOOM>, and <SHIFT>) buttons.
1)
Press as to select [SECURITY PASSWORD].
2)
Press qw to switch [SECURITY PASSWORD].
r
f
The setting will change between [OFF] and [ON] each time you
press the button.
r
r
[SECURITY PASSWORD]
[OFF]
Disables the security password entry.
[ON]
Enables the security password entry.
Note
r
f
The [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized.
r
f
Change the password periodically that is hard to guess.
r
f
The security password will be enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.
[SECURITY PASSWORD CHANGE]
Change the security password.
1)
Press as to select [SECURITY PASSWORD
CHANGE].
2)
Press the <ENTER> button.
r
f
The
[SECURITY PASSWORD CHANGE] screen is displayed.
3)
Press asqw and the number (<0> to <9>)
buttons to set the password.
r
f
Up to eight button operations can be set.
4)
Press the <ENTER> button.
5)
Re-enter the password for the confirmation.
6)
Press the <ENTER> button.
Note
r
f
The entered password is displayed with * mark on the screen.
r
f
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1)
Press as to select [DISPLAY SETTING].