Panduit FR12X4YL2 Leaflet
www.panduit.com
FiberRunner
®
12x4 Routing System
S P E C I F I C A T I O N S H E E T
a p p l i c a t i o n s
Fastest installations No bolts need to be tightened and no tools are required when installing the
QuikLock
™
Coupler; QuikLock
™
Couplers and Brackets take less than five
seconds to make a mechanically secure connection
Easy to maintain
Hinged channel cover and split fitting covers protect cabling and provide
fast and easy access for future cabling moves, adds, and changes
System strength
Robust system of channel, covers, fittings and other non-metallic system
components protect cable from physical damage; system includes full
range of directional and spillout fittings
Versatility
Multiple spillout options include a spill-over fitting and the vertical tee
which accepts a 3-sided trumpet, transition to corrugated tubing and
Panduit
®
FiberRunner
®
and Fiber-Duct
™
Systems
Cable protection
A minimum 2" bend radius maintained throughout all fittings prevents
excessive bends in fiber optic cabling
k e y f e a t u r e s a n d b e n e f i t s
Open channel
Cable
No. of Cables
50% fill capacity: 1.6mm
8183
(4" pile up)
2.0mm
5237
3.0mm
2327
Fiber Optic
Ribbon Interconnect 5.20mm
773
Category 6
6.35mm
519
Category 6A
7.57mm
366
Material:
Rigid PVC (Channel), ABS (Fittings)
Flammability: 94V-0
Approvals:
Approvals:
UL Listed to 2024A Optical Fiber Cable Routing Assemblies
Compliant with the applicable tests in Telcordia GR-63-CORE
Network Equipment Building Systems Level 3
CSI spec form: LP-CSISPEC-FR
t e c h n i c a l i n f o r m a t i o n
The 12x4 routing system shall be a system of channel,
fittings, and brackets designed to segregate, route, and
protect fiber optic and high performance copper cabling.
Channel and fittings shall be assembled using pre-assembled
couplers. A selection of spillout options shall be available that
easily attach using the vertical tee. Fittings maintain a
minimum 2" bend radius to protect against signal loss due to
excessive cable bends. Available system colors shall be
yellow, orange, and black. A full complement of brackets shall
be available for attaching system components to ladder rack,
threaded rod, auxiliary framing, strut, equipment racks,
cabinets, and raised floor pedestals.
s p e c i f i c a t i o n s
The FiberRunner
®
12x4 Routing System is a system of
channel, fittings and brackets designed to segregate,
route, and protect fiber optic and high performance
copper cabling. It is suited for data center applications
where cable is routed from distribution areas to
equipment cabinets or racks. It is used in Telco Central
Offices to route fiber optic jumper cables between fiber
distribution frames and equipment bays. It can be
deployed over the racks or in approved under floor
applications. Because of its larger capacity, the 12x4
system is used to route higher cable counts. Channel
and fittings are assembled using timesaving Panduit
®
QuikLock
™
Couplers. A selection of spillout options is
available that easily attach using the vertical tee.
Fittings maintain a 2" bend radius to protect against
signal loss due to excessive cable bends. Available
system colors are yellow, orange, and black to
differentiate various types of cabling. A full complement
of QuikLock
™
Brackets is available to attach system
components to support structures found in
all applications.
The FiberRunner
®
12x4 Routing System is part of the
Panduit complete fiber distribution system, which
includes the FiberRunner
®
24x4, 6x4, 4x4, and 2x2
Routing Systems, the Fiber-Duct
™
4x4 and 2x2
Routing Systems, Wyr-Grid
™
Overhead Cable Tray
System, cable management, and racks.
4.44
(112.8)
12.97
(329.4)
A = 51.0 in.
2
Dimensions are in inches
(Dimensions in parentheses
are metric).
(Dimensions in parentheses
are metric).
Channel and Cover
12x4 channel (6'):
FR12X4**6
12x4 hinged cover (6'):
FRHC12**6
Cable retainer:
FRCR12BL-X
Fittings, Split Covers, and Spillouts
QuikLock
™
Coupler:
FRBC12X4**
Horizontal right angle:
FRRA12X4**
Right angle cover:
FRRASC12**
Horizontal tee:
FRT12X4**
Horizontal tee cover:
FRTSC12**
Horizontal tee with 6"exits:
FRT12X4W6**
Tee with 6" exits cover:
FRTSC12W6**
Horizontal 45°:
FRH4512X4**
Horizontal 45° cover:
FRH45SC12**
Outside vertical 90°:
FROVRA12X4**
Outside vertical 90° cover:
FROVRASC12**
Inside vertical 45°:
FRIV4512X4**
Outside vertical 45°:
FROV4512X4**
Outside vertical 45° cover:
FROV45SC12**
4-way cross:
FRFWC12X4**
4-way cross cover:
FRFWCSC12**
4-way cross with 6" exits:
FRFWC12X4W6**
4-way cross with
6" exits cover:
FRFWCSC12W6**
End cap:
FREC12X4**
12 to 6 reducer:
FRRF126**
12 to 6 reducer cover:
FRRF126SC**
Y-reducer from 12" to two 6": FRY126**
Y-reducer from 12"
to two 6" cover:
FRY126SC**
12" to 6" reducer right fitting: FRRF126R**
12" to 6" reducer
right fitting cover:
FRRF126RSC**
12" to 6" reducer left fitting:
FRRF126L**
12" 6" reducer
left fitting cover:
FRRF126LSC**
Adapter to ADC
12x4 FiberGuide*:
FRADC12X4BL
QuikLock
™
Vertical Tee: FRVT12X4**
3-sided BRC trumpet
spillout for 6x4 exit: FRTR6X4**
Corrugated tubing spillout: FRIDT6X4**
4x4 hinged duct vertical
cable manager kit: FRHD4KT**
4x4 hinged duct bend
radius control trumpet: TRC4HDBL
Low profile reducer 6x4 to
4x4 for vertical tee: FRLPR64BL
Spill-over with 2x2 exit: FRSPJ2X2**
Spill-over cover with
2x2 exit for 12x4 system: FRSPJC212**
2x2 3-sided trumpet: FTR2X2**
1-port spillout to 1.5" I.D.
corrugated tubing: FIDT2X2**
2x2 hinged duct vertical
cable manager kit: FRHD2KT**
2x2 FiberRunner
®
Bend
Radius Control Trumpet: TRC2HDBL
Spill-over with 4x4 exit:
FRSPJ4X4**
Spill-over cover with
4x4 exit for 12x4 system: FRSPJC412**
4x4 3-sided trumpet: FRTR4X4**
2-port spillout to 1.5" I.D.
corrugated tubing: FRIDT4X4**
1-port spillout to 1.5" I.D.
corrugated tubing: FR1.5IDE**
3-sided BRC trumpet
for 12x4 exit: FRTR12X4**
QuikLock
™
Mounting Brackets
QL existing 5/8" thr rod brkt:
FR12TRBE58
QL new 5/8" thr rod brkt:
FR12TRBN58
QL under floor brkt:
FR12USB
QL adjust ladder rack brkt:
FR12ALB
QL center support brkt 1/2":
FR12CS12
QL center support brkt 5/8":
FR12CS58
QL adjust C-brkt 1/2":
FR12ACB12
QL adjust C-brkt 5/8":
FR12ACB58
QL trapeze 1/2" brkt:
FR12TB12
QL trapeze 5/8" brkt:
FR12TB58
Two-piece ladder rack brkt
1/2" thr rod:
F2PCLB12
Two-piece ladder rack brkt
5/8" thr rod:
F2PCLB58
QL adjustable cabinet brkt:
FR12ACAB
Two-piece framing clip 5/8"
thr rod to 9/16" C-channel
aux. framing bars: FRAFC58
4 post rack brkt: FR4PRB58
*ADC’s 12x4 FiberGuide Management System is a
product of ADC Telecommunications, Inc.
**Substitute: YL = Yellow, OR = Orange, BL = Black