Fujitsu RX300 S7 VFY:R3007SX180FR Data Sheet

Data Sheet

 Fujitsu PRIMERGY RX300 S7 Dual socket 2 U rack server 

Page 4 / 10

www.fujitsu.com/fts

Memory notes

Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory 
modules/CPU with single or dual-rank  RDIMM or single, dual-rank or quad-rank  Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or 
Performance Mode with identical modules in all four channels (4 modules per bank).

Memory options

4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
32 GB (1 module(s) 32 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM

Memory options

2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM

Interfaces

USB ports

10 x USB 2.0 (2x front, 4x rear, 2x internal for backup devices, 1x USB stick, 1x uSSD)

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

Serial 1 (9-pin)

1 x serial RS-232-C,  usable for iRMC or system or shared

LAN / Ethernet

2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s 
(SFP+)

Service LAN (RJ45)

1 x dedicated management LAN port for iRMC S3  (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port 
or optional Modular LAN 2x10Gbit controller
Front management LAN port as option

Onboard or integrated Controller

RAID controller

4 port for internal 3G SATA and SAS (as upgrade option “Patsburg B”) for HDDs with RAID 0/1/10 or SAS LTO device  
(Intel C600)
additional RAID controller options are described under Components RAID controller

SATA Controller

Intel® C600, 1 x SATA channel for ODD

LAN Controller

Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN  
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless) 

Remote Management Controller

Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x8

5 x Low profile 

PCI-Express 3.0 x16

2 x Low profile (2nd processor required)

Slot Notes

One PCIe Gen3 x8 slot may be occupied with a Modular integrated on-board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured.
Important: 5 PCIe x8 slots are supported with the first processor. 7 PCIe slots (including 2 PCIe x16) are supported with 
two processors.

Drive bays

Storage drive bays

2.5-inch base unit (max. 16 x 2.5) or 3.5-inch base unit (max. 6 x 3.5)

Accessible drive bays

1 x 5.25/0.5-inch for ODD
1 x 5.25/1.6-inch for ODD or backup devices 
1 x 5.25/0.5-inch for Local Service Display 

Notes accessible drives

All possible options described in relevant system configurator.

Drive bays (Base unit specific)

Storage drive bays

6 x 3.5-inch hot-plug SAS/SATA

2.5-inch expandable x 2.5-inch hot-plug SAS/SATA

Storage drive bay configuration

max. 6x3.5”

max. 16x2.5”

Optional accessible drives

1x 3.5/1.6-inch bay for backup devices (occupies 2x 3.5-
inch HDD)

LTO 5.25” or DAT/RDX 3.5” possible