Cisco Catalyst 3850 WS-C3850-48P-E Data Sheet

Product codes
WS-C3850-48P-E
Page of 28
 
 
© 2013 Cisco and/or its affiliates. This document is Cisco Public Information. 
Page 2 of 28 
Switch Configurations 
All switches ship with one of the four power supplies (350WAC, 715WAC, 1100WAC, or 440WDC). Figure 1 
shows the Cisco Catalyst 3850 Series Switches. 
Figure 1.    Cisco Catalyst 3850 Series Switches 
 
Table 1 shows the Cisco Catalyst 3850 Series configurations. 
Table 1. 
Cisco Catalyst 3850 Series Configurations 
Models 
Total 10/100/1000 
Ethernet Ports 
Default AC Power Supply 
Available PoE Power 
StackPower 
WS-C3850-24T 
24 
WS-C3850-48T 
48 
350WAC 
WS-C3850-24P 
24 PoE+ 
WS-C3850-48P 
48 PoE+ 
715WAC 
435W 
WS-C3850-48F 
48 PoE+ 
1100WAC 
800W 
Yes 
Network Modules 
The Cisco Catalyst 3850 Series Switches support three optional network modules for uplink ports. The default 
switch configuration doesn’t include the uplink module. At the time of switch purchase the customer has the 
flexibility to choose from the network modules described in Table 2. 
Figure 2 shows various network modules: 
 
4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) 
 
2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP 
 
4 x 10 Gigabit Ethernet with SFP+ (supported on the 48-port models only) 
Figure 2.    Network Modules with Four Gigabit Ethernet, Two 10 Gigabit Ethernet SFP+, or Four 10 Gigabit Ethernet SFP+ 
Interfaces