Sharp LC-60LE640U User Manual

Using a PC

Example

View Option

Input Terminal Setting

AQUOS LINK Setup

Menu Design

k O t

System Options

System
Options

Press MENU to display the MENU screen, and then

press

c/d to select "System Options".

Press

a/b to select "Input Terminal Setting", and

then press ENTER.

Press

a/b to select "PC input" or "Audio Select",

and then press ENTER.

Press

a/b to select a speciﬁ c adjustment item,

and then press ENTER to set each item.

Press

a/b (or c/d) to select or adjust the desired

setting, and then press ENTER.

Adjusting the PC Image

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image."

displays.

No: This function does not work.

• When "Auto Sync." is successful, "Completed" displays. If

not, "Auto Sync." failed.

• "Auto Sync." may fail even if "Completed" displays.
• "Auto Sync." may fail if the computer image has low

resolution, has unclear (black) edges, or is moved while
executing "Auto Sync.".

• Be sure to connect the PC to the TV and switch it on before

starting "Auto Sync.".

Fine Sync.

Ordinarily you can easily adjust the picture as necessary
to change image position using "Auto Sync.". In some
cases, however, manual adjustment is needed to
optimize the image.

H-Pos.: Centers the image by moving it to the left or right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image ﬂ ickers with vertical

stripes.

Phase: Adjust when characters have low contrast or

when the image ﬂ ickers.

• For resetting all "Fine Sync." adjustment items to the factory

preset values, press

a/b to select "Reset", and then press

ENTER.

• It is not necessary to adjust the "Clock" or "Phase" when a

digital signal is being input, so it cannot be selected.

• The default cursor position may not be in the center,

because the screen position variable ranges may be
asymmetrical.

• The screen position variable ranges depend on the View

Mode or the signal type. The ranges can be seen on the
position-setting screen.

Setting Audio Input

Audio Select

This function sets the terminal to output the computer
audio.
The adjustment items vary depending on the input
source. Select the input source corresponding to the
terminal connected to the PC and then adjust the
desired item.
■ PC IN

Video: Select this when the TV and PC are connected

using an analog RGB cable and the audio is not input.

Video+Audio: Select this when the TV and PC are

connected using an analog RGB cable and the audio is
input via a Ø 3.5 mm stereo minijack.

■ HDMI 1

HDMI(Digital): Select this when the TV and PC are

connected using an HDMI-certiﬁ ed cable and audio is
input via the same cable.

HDMI+Analog: Select this when the TV and PC are

connected using a DVI-HDMI conversion cable and the
audio is input via a Ø 3.5 mm stereo minijack.

• When "Audio Select" is set to "HDMI(Digital)", sound will

not be produced if you use only an HDMI-certiﬁ ed cable to
connect HDMI-compatible equipment. To produce sound,
you should make an analog audio connection.

• If you want to connect HDMI-compatible equipment

using only an HDMI-certiﬁ ed cable, set "Audio Select" to
"HDMI(Digital)".

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA
and WXGA signal.

VGA and XGA are registered trademarks of International
Business Machines Corp.

31.5 kHz

31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz

640 x 480

720 x 400

VGA

800 x 600

SVGA

XGA

1024 x 768

WXGA

1360 x 768

70 Hz

60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz

O
O
O
O
O
O
O

O
O

64.0 kHz

SXGA

1280 x 1024

60 Hz

65.3 kHz

SXGA+

1400 x 1050

60 Hz

75.0 kHz

UXGA

1600 x 1200

60 Hz

67.5 kHz

1080p

1920 x 1080

60 Hz

Horizontal
Frequency

VESA

Standard

Resolution

Vertical

Frequency

LC-80LE633U_70_60_52LE640U_C6400U_E.indb 54

2012/01/05 16:20:36