Fujitsu PRIMERGY TX200 S3 VFY:TX200S3-107BN Leaflet

Product codes
VFY:TX200S3-107BN
Page of 2
Datasheet 
⏐ Issue: September 22, 2006⏐ PRIMERGY TX200 S3 
Page 2 / 2 
 
 
 
Type 
Dual Socket Tower Server  
System board  
D 2109 
  Chip set 
Intel® 5000V 
  Processors 
Dual-Core Intel® Xeon® (1 - 2) 
  Frequencies (GHz) 
5050 (3.00) / 5060 (3.20), or   
5110 (1.60), 5120 (1.86) / 5130 (2.00), 
5140 (2.33)  
  Front-Side-Bus/Socket  667 / 1066 / 1333 MHz  
  Second-Level-Cache  
2x 2 / 4 Mbyte (5100 series), ECC 
Memory 
1 GByte bis max. 16 GByte 
2-way interleaved, registered ECC PC2-4200F/-5300F 
FullyBuffered DIMM RAM; 3 banks with 2 slots each for modules 
512 MB, 1, 2 and 4 GB; SDDC (Chipkill) and hot-spare memory 
support  
Flash-EPROM 
Local BIOS update with floppy disk; Remote BIOS-Update via LAN 
with Global Flash and service partition  
Interfaces  
  Serial 1 
1x RS-232-C (9-pin) (usable for  
BMC or system) 
  Serial 2 
1x RS-232-C (9-pol)  
  Parallel (option) 
Centronics, 25-pin, EPP/ECP comp. 
  Keyboard, Mouse 
2x PS/2 
  USB 2.0 
1x front, 2x back (UHCI, 480 Mbit/s) 
2x internal for backup drive 
  Graphics 
1x VGA (15-pin) 
  LAN 
1x RJ45, 1x Service-LAN RJ45 
Front Panel 
On/off button; NMI-, reset button; front LEDs for hard disks access 
(green), power (amber/green); back and rear for system status 
(amber), identification (blue) 
Onboard Controller ** 
  IDE (ATA100) 
1-channel Fast-IDE controller for 1 device  
  SAS variant    
  (LSI1068) 
8-Port SAS controller with RAID 0, 1, 1E 
(1E requires 3 or more HDD´s) (also for 
SATA HDD´s) 
  RAID option  
  (PCI card, ZCR) 
RAID level 0, 1, 10, 5, 50 extension for 
onboard SAS controller (not for SATA HD) 
  SATA variant   
  (ESB2 onb.) 
6-Port SATA Controller with RAID level 0, 
1,10 (RAID 5 in 4. qu. 06) 
  LAN (Intel® GilGal)   1x 10/100/1000 Mbit/s Ethernet 
(PCE-Boot via LAN from PXE server) 
  Server 
management 
Integrated Remote Management Controller 
(iRMC) incl. graphics controller, IPMI 2.0  
PCI controller ** in SCSI base unit 
LSI320/2 
2-channel U320 SCSI/RAID controller 
Hard disk drives 
36, 73, 146 Gbyte SAS (no mix with SATA) 
80, 160, 250, 500 Gbyte SATA 
36, 73, 146, 300 Gbyte SCSI 
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 
I/O Slots (Standard) 
1x PCIe x8, long,  
1x PCIe x8 (x4 wired), long,  
2x PCI-X 64-bit/ 100 MHz, 1x long, 3,3V; (1 for ZCR in SAS 
variant, 1x occupied in SCSI version)  (1x with max. 133 MHz 
(IOOP™), if only 1 slot is occupied)(with SAS only 66/100 MHz) 
  1x PCI 32-bit / 33 MHz, long, 5V  
Drive bays  
  for hard disks  
6x 3.5/1-inch, hot-plug, slide-in chassis 
  for optional SCSI 
  hard disks 
3x 3.5/1-inch, hot-plug, requires  
2 bays for accessible drives 
  for accessible drives 
3x 5,25/1,6-inch free or
2x 5,25/1,6-inch free  
1x 5,25/0,5-inch for CD,DVD;  
    CD-/DVD-RW  
1x 3,5/1-inch occupied with FD 
System fans  
Standard 2 fans  
Hot-plug, redundant (option):  (2 + 2)  fans + 2 fans for CPU´s 
 
Electrical values  
1x standard or 2x optional redundant hot-plug power supplies 
  Output power 
600 W  / 1 + 1 x 600 W each 
  Rated voltage range 
100 - 240 V  
  Rated frequency 
50 - 60 Hz  
  Max. rated current  
100 V - 240 V / 9.0 A – 5.0 A 
  Rated current in basic    
  configuration 
100 V - 240 V / 4.4 A - 1.5 A  
  Active power 
798 W 
  Apparent power 
809 VA 
  Heat emission 
2873 kJ/h (2723 btu/h) 
Temperature/Noise/Dimension/Weight 
  Ambient temperature 
10°C - 35°C (EN60721-3-3 class 3K2) 
Declared noise emission  
according to ISO 9296 
  
     idle*      operating* *(ISO 7779) 
L
WAd
 (1 B = 10 dB) :  
    5.7 B***         5.8 B***  
L
pAm 
(bystander position):      39 dB***         40 dB*** 
  Floor-stand (HxWxD) 
473 x 286 x 775 mm 
  Rack (HxWxD) 
177 x 483 x 770 mm;  
Rack mounting depth 735 mm; 4 U 
  Weight  
25 - 40 kg (configuration dependent) 
Compliance with Norm and Standards  
 Product safety 
  Global  
IEC 60950-1 
  Europe  
EN 60950-1 
  USA 
UL 60950-1 
  Canada 
CAN/CSA C22.2 No. 60950-1-03 
 Electro magnetic compatibility 
  Europe 
EN 55022 class A, EN 55024,  
EN 61000-3-3, EN 61000-3-2 
  Taiwan / Japan 
CNS 13438 class A; VCCI class A 
  Australia / New Zealand  AS / NZS CISPR 22 class A 
  USA / Canada 
FCC class A 
 Declaration of conformity                
  Europe (CE)  
89/336/EEC(EMC);73/23/EEC(LVD) 
  North America  
FCC class A  
Approvals  
 Product safety  
  Global 
CB 
  Europe 
CE 
  USA / Canada 
CSA
US
 / CSA
C
There is general compliance with the safety requirements of all 
European countries and North America. National approvals 
required in order to satisfy statutory regulations or for other 
reasons, can be applied for on request. 
Supported operating systems 
  Microsoft: Windows 2003 Standard, Enterprise IA32 Edition;  
  Microsoft: Windows 2003 Standard, Enterprise x64 Edition;  
  Microsoft Windows 2003 Web Edition 
  Microsoft Small Business Server 2003 Stand./Premium Edition* 
  Microsoft: Windows 2000 Advanced Server; Server 
  SUSE: Enterprise Server 8 for x86, 9 and 10 x86 / EM64T  
  Red Hat: Enterprise Linux  3 and 4 for X86 / EM64T 
*  No application support 
** For supported controllers (onboard and PCI cards for SCSI, 
RAID, LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
*** only with standard fans and standard PSU 
Server Management (see separate data sheets) 
  Standard:  
PRIMERGY ServerView Suite;  
PDA, ASR&R  
  Optional:  
RemoteView, iRMC Advanced Pack 
 
 
 
All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 
© Fujitsu Siemens Computers, 10/2006 
  Published by  
 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/
Company stamp