Phoenix Audio MT107A Leaflet
Phoenix Audio Technologies, 2934 N. Naomi Street, Burbank, CA 91504; Tel (818) 937-4774
www.phnxaudio.com
OUT2 (speaker output): Connect to your speakers.
OUT2 is a stereo speaker output setup as Line level.
The signal through this connector is similar in quality
to the Far-end input (preventing degradation in
quality of your Hi-Fi sound).
Note: you can select to split the speaker signal, by
connecting our unit with one end of the split and
your speakers directly with the other (see the
dashed line in the diagram below).
OUT2 is a stereo speaker output setup as Line level.
The signal through this connector is similar in quality
to the Far-end input (preventing degradation in
quality of your Hi-Fi sound).
Note: you can select to split the speaker signal, by
connecting our unit with one end of the split and
your speakers directly with the other (see the
dashed line in the diagram below).
Modifying
System
Parameters
Through the SDK
As mentioned in the Specification section, some of
the MT107A parameters can be controlled,
modified, and stored on the unit using a software
setup utility which we refer to as the SDK.
The SDK is a graphic software utility, available for
Windows operating systems that can be downloaded
the MT107A parameters can be controlled,
modified, and stored on the unit using a software
setup utility which we refer to as the SDK.
The SDK is a graphic software utility, available for
Windows operating systems that can be downloaded
for free from our website. The SDK communicates
with the MT107A through a standard USB link.
Once the settings have been modified using the SDK,
the user can save the new settings onto the device
(by clicking Save). The parameters that can be
modified with the SDK include:
with the MT107A through a standard USB link.
Once the settings have been modified using the SDK,
the user can save the new settings onto the device
(by clicking Save). The parameters that can be
modified with the SDK include:
input level (mic / line / 6dB boost)
phantom power supply (yes / no)
color filter (10 different pre-set filters)
output level (mic / line).
These parameters can be controlled by “double
clicking” the specific icon (for example the input
amplifier) or through the software’s menu.
For additional information please refer to our
website at
USB Power &
Digital Audio Out
Analog Audio
Out
Stereo Speaker
Signal (Analog)
Stereo
Speakers
Stereo
Microphone
Microphone