Crucial Micron P300 50GB SATA MTFDDAC050SAL-1N1AA User Manual
Product codes
MTFDDAC050SAL-1N1AA
P300 2.5-Inch SATA NAND Flash SSD
MTFDDACxxxSAL1x1
Features
• Micron
®
SLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
• SATA 6 Gb/s interface
• ATA modes supported
– PIO modes 3 and 4
– Multiword DMA modes 0, 1, 2
– Ultra DMA modes 0, 1, 2, 3, 4, 5, 6
– Multiword DMA modes 0, 1, 2
– Ultra DMA modes 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queueing support with 32 com-
• Hot-plug capable
• Native command queueing support with 32 com-
mand slot support
• ATA8-ACS2 command set support
• Secure erase (data page) command set
• Self-monitoring, analysis, and reporting technology
• Secure erase (data page) command set
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Performance (empty/steady state)
– Sequential READ: up to 360/360 MB/s
– Sequential WRITE: up to 275/255 MB/s
– Random READ: up to 60,000/44,000 IOPs
– Random WRITE: up to 45,200/16,000 IOPs
– READ latency: 0.153/0.154ms (TYP)
– WRITE latency: 0.118/0.424ms (TYP)
– Sequential WRITE: up to 275/255 MB/s
– Random READ: up to 60,000/44,000 IOPs
– Random WRITE: up to 45,200/16,000 IOPs
– READ latency: 0.153/0.154ms (TYP)
– WRITE latency: 0.118/0.424ms (TYP)
• Reliability
– MTBF: 2 million hours
– 3-year warranty
– Static and dynamic wear leveling
– Field-upgradable firmware
– Uncorrectable bit error rate (UBER): <1 sector
– 3-year warranty
– Static and dynamic wear leveling
– Field-upgradable firmware
– Uncorrectable bit error rate (UBER): <1 sector
per 10
16
bits read
– Low power consumption: <7W (AVG)
• Endurance: Total bytes written (TBW) – 50GB
( 0.875PB); 100GB (1.75PB); 200GB (3.5PB)
• Mechanical/electrical
– Standard SATA connector
– 5V power (±10%)
– Dimensions: 100.45mm x 69.85mm x 9.5mm
– Weight: 100g
– 5V power (±10%)
– Dimensions: 100.45mm x 69.85mm x 9.5mm
– Weight: 100g
• Operating temperature: 0°C to 70°C
• Humidity (operating): 5% to 95% RH
• Shock and vibration
• Humidity (operating): 5% to 95% RH
• Shock and vibration
– 1500G/0.5ms
– 5–500Hz at 3.1G
– 5–500Hz at 3.1G
• Capacity
: 50GB, 100GB, 200GB
Notes: 1. 128K transfers used for sequential READ/
WRITE values.
2. 4K transfers used for random READ/WRITE
latency values.
3. I/O performance numbers as measured us-
ing Iometer with a queue depth of 32 and
write cache disabled.
write cache disabled.
4. Performance values apply to all drive ca-
pacities.
5. 1GB = 1 billion bytes; formatted capacity is
less.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
for further information regarding the product,
including product warranties.
P300 2.5-Inch NAND Flash SSD
Features
PDF: 09005aef840793dc
p300_2_5.pdf - Rev. K 5/12 EN
p300_2_5.pdf - Rev. K 5/12 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
©
2010 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.