Pyle PFA300 Leaflet
Specifications:
Input power: DC 9~14.4V 2A
Output Power: 90 W
Speaker impedance: 2-8Ω
Frequency response: 20Hz-20kHz
Total harmonic distortion: <0.4%
SNR: >80dB
Total harmonic distortion: <0.4%
SNR: >80dB
PFA300
Class T Amplifier
The PFA300 uses a Class-T audio amplifier
IC for low distortion and acoustically
accurate reproduction of music.
Tone/direct switching allows for
accurate reproduction of music.
Tone/direct switching allows for
customized listening via separate bass and
treble adjustments — or the original signal
can be passed through without
enhancement.
treble adjustments — or the original signal
can be passed through without
enhancement.
The built-in loudspeaker protection circuit triggers when the amplifier is
turned on to protect speakers from high volume bursts of audio.
Over-voltage protection circuit shuts down the amplifier if input voltage
exceeds 14.4 V DC.
State of the art design using surface mount components and advanced
engineering for proven performance, reduced signal interference, and long
operational life.
engineering for proven performance, reduced signal interference, and long
operational life.
Front Inputs: 3.5mm (1/8”)
Rear Outputs: Speaker, RCA L/R, ¼” Mic